PIPE BEVELING MACHINES OD MOUNT MF4-R Clamping range OD-OD: The MF4-R is used for beveling pipe ends or membrane walls. Due to its low weight, the machine can be operated by only one person and is suitable for both workshop and construction site use. The MF4-R pipe beveling machine can be optionally equipped with a pneumatic or an electric motor. Optional accessories Technical data Available drives Working range ID-OD Clamping range OD-OD Max. wall-thickness_ Weight with pneumatic motor_ Weight with electric motor Weld prep_ _facing, V & J-prep, counter boring steel, stainless steel, duplex, high-alloyed _tool bits, TiN inserts,custom bits Pneumatic motor Features speed control Electric motor_ Features speed adjustment Clamping range OD-OD: 20 - 38 mm The special versatility of the MF2-25 pipe beveling machine is characterised by the panel wall machining with indexable insert crown cutters up to a 0 38.0 mm. The minimum panel wall width is only 40.0 mm. Optional accessories Tooling Indexable insert (from p. 32) crown milling Technical data Available drives Working range ID-OD_ Clamping range OD-OD Max. wall-thickness_ Weight with pneumatic motor Weight with electric motor Weld prep_ Machine body _facing, V & J-prep, counter boring steel, stainless steel, duplex, high-alloyed _tool bits, TiN inserts,custom bits lightweight housing Pneumatic motor Features speed control Electric motor_ Features restart and overload protection, speed adjustment, torque