Specifications:
The document provides specifications for two types of cutting systems: BWC Electric and BWC Pneumatic. Both systems have a maximum pipe diameter of 76.1 mm. The depth of cut with a new cutting blade is 87 mm for the electric version and 85 mm for the pneumatic version. Both systems use a guide rail with a total length of 4.5 m and a segment length of 1.5 m, weighing 13 kg. The electric system has a nominal input of 2,500 W and a power output of 1,700 W, with an idle speed of 6,600 rpm and a cutting blade diameter of 230 mm. The pneumatic system has a power output of 4,400 W, an idle speed of 5,900 rpm, a cutting blade diameter of 355 mm, and requires a 3/4” air hose connection with an air consumption of 3.6 m³/min.

Boiler Panel Cutting System:
The BWC cutting system is designed for use in boiler technology, specifically for cutting membrane walls during maintenance and inspection. It significantly reduces the heat-affected zone compared to flame cutting, minimizing the need for costly rework. The system enhances workplace safety through stable guidance of the cutting tool and reduces wear on cutting discs due to precise guidance. The tool slide ensures smooth operation, increasing productivity and cutting quality while reducing rework and eliminating the heat-affected zone.

Key Features:

• Equipped with either a pneumatic or electric motor.
• Efficient and effective cutting of membrane walls.
• High productivity and cutting quality.
• Reduced rework and no heat-affected zone.
• Enhanced operator safety.