*mydirectindustry

CB 10 / CB 12

Product catalog summary

Product Description:
The CB 10 and CB 12 compressors are compact and lightweight due to their monoblock design and use of light-weight alloys. They feature a protective filter at the inlet and are cooled by an integral motor fan. These compressors can be installed in limited spaces with adequate ventilation.

Warning:
To prevent damage, it is recommended to use a pressure relief valve set to the maximum pressure specified for each unit.

Main Accessories:

Spare parts kit: CB 10 - K9701028, CB 12 - K9701029
Shock mounts: 4 x 1503005
Inlet additional filter: 9001010
Inlet hose fitting: 2103010 (Ø17)
Pressure relief valve: 9012012

Technical Specifications:

Nominal capacity: CB 10 - 10 m³/h (50Hz), 12 m³/h (60Hz); CB 12 - 12 m³/h (50Hz), 14 m³/h (60Hz)
Maximum overpressure: 0.6 bar - 105Pa
Motor power: CB 10 - 0.37 KW (1~/3~), CB 12 - 0.45 KW (3~)
Nominal r.p.m: 1400 (50Hz), 1700 (60Hz)
Noise level: 64 dB(A) (50Hz), 66 dB(A) (60Hz)
Weight: CB 10 - 15.5 kg (1~), 14 kg (3~); CB 12 - 14.5 kg (1~), 13.5 kg (3~)
Operating temperature: 70-75°C (50Hz), 80-85°C (60Hz)
Required room temperature for installation: 0-40°C
Storage/transport temperature: -20 to 50°C
Max humidity/altitude: 80% / 1000m above sea level

Note: The graph indicates performance at 1013mbar (Abs.) pressure and 20°C with a tolerance of ±10%.

Catalog excerpts

DATA SHEET CB 10 / CB 12 Subject to change without prior notice DESCRIZIONE PRODOTTO: I compressori CB 10 e CB 12 sono dotati di serie di: • Filtro protettivo in aspirazione La forma costruttiva di tipo monoblocco con il rotore montato direttamente sull’albero del motore e l’impiego di leghe leggere conferiscono a questa serie di compressori ingombri e peso contenuti per una collocazione anche in spazi ristretti purche sufficientemente aerati. Il raffreddamento del compressore e affidato alla ventola del motore. ATTENZIONE: Al fine di evitare danneggiamenti al compressore e al motore elettrico e consigliato l’impiego di una valvola limitatrice di pressione tarata alla pressione massima di lavoro del compressore indicata nella tabella. PRODUCT DESCRIPTION: The CB 10 and CB 12 compressors are equipped with: • Protective filter at the inlet The industrial monoblock design with the rotor directly assembled on the motor shaft and the use of light-weight alloys mean that this series of compressors is of limited size and weight and can be fitted into a limited space, provided there is good ventilation. Compressor cooling is ensured by an integral motor fan. WARNING: To avoid damage to the compressor or electrical motor it is recommended a pressure relief valve adjusted not to exceed the max pressure allowed for each unit shown in the table. D.V.P. Vacuum Technology spa | www.dvp.it C.9701028CB10-9701029CB12 | Edition 31/07/18 | Page 1/2

Open the catalog to page 1

DATA SHEET Subject to change without prior notice (*) Per condizioni ambientali differenti da quelle prescritte contattare il Costruttore. (*) Please contact the Manufacturer if environmental conditions are different from those prescribed. D.V.P. Vacuum Technology spa | www.dvp.it C.9701028CB10-9701029CB12 | Edition 31/07/18 | Page 2/2

Open the catalog to page 2

CB 10 / CB 12

CB 10 / CB 12

Catalog excerpts

All DVP Vacuum Technology catalogs and technical brochures