Rotoworx 330
4Pages

The Rotoworx® 330 product range is an conomie, stand-alone, modular converting and finishing solution designed to make short-run label conversion and finishing less costly. It features product unwind, semi-rotary die-cut, lamination, matrix rewind and two product rewind modules. It has a maximum web-width of 13 in. (330 mm) and is available in two standard versions: Rotoworx® 330 - up to 100 fpm (30 m/min). 镕 Rotoworx® 330 HS high-speed version - up to 160 fpm (50 m/min). The Rotoworx® 330 has been specifically designed with efficient and cost effective short run operation in mind. The extremely small footprint - 37 sq.ft. (3.5 m2) and the short web path - 11.5 ft. (3.5 m) in combination with a homing cycle and on/off impression die station results in minimal waste during job changeovers and roll splices. Re-registration is possible within one or two repeats. The Rotoworx® 330 is equipped with deployable, industrial casters for easy relocation to suit operational requirements. Both, standard and high speed version can be configured with a choice of optional modules to suit customer specific requirements and applications, such as modules for UV flood coating, UV digital varnish and monochrome variable data printing.

Semi-rotary Die Station The semi-rotary die-station is complte with sensing technology to electronically re-register to incoming pre-printed material. It uses a magnetic cylinder and soft tooling to facilitate fast changeovers and reduced tooling costs. The die tool anvil system is equipped with an off impression mode to reduce waste during changeovers and make ready. ISO-Tensioning System (Patented) The system features a field-proven web transport based on Durst's patented ISO Tensioning technology with high registration accuracy of +/- 0.007 in. (180 microns) and a repeat size from 8 in....

DIVA Digital Varnishing and Variable Data Print Engine Rotoworx DIVAٙ is a Digital print engine available as an integrated module for the Rotoworx 330 systems, which can be configured for digital Varnish applications, offering the unique ability to produce different gloss finish with one single fluid in one single pass - a first in the industry. DIVA with its 13" (330 mm) wide print module is designed for spot varnishing applications on pre-printed materials. This completely digital printing process enables customers to produce special effects, such as textures and even tactile elements...

Technical Data General spcifications Speed: Rotoworx® 330 opr驢tes at up to 100 fpm (30 m/min.) Rotoworx® 330 HS version operates at up to 160 fpm (50 m/min.) Unwind capacity: 30 in. (760 mm) Web width: 13 in. (330 mm) to minimum of 2 in. (50 mm) Repeat size: 8 in. (203 mm) to 16 in. (406 mm) Lamination: Top side lamination 20 in. (510 mm) capacity Die cut: Semi-rotary die cutting +/- .007 in. (180 p) registration accuracy+ Slit: Underscore with two knives (additional knives optional) Օ Crush slitter with two knives (additional knives optional) Rewind: Dual product rewind 24 in. (610 mm)...