InkShaker Automatic shaking device for Durst Gamma ink cubitainers The Durst InkShaker® has been specially designed for perfectly shaking the pigmented ceramic inks before loading them into the Durst Gamma printers. The user-friendly design allows an easy and quick loading of the ink cubitainer (Durst proprietary system) delivered in 10 or 5 liter versions. After pressing the start button the gentle shaking procedure in dual sense rotation is carried out fully automatic. After 4 minutes the ink is ready to be filled into the Gamma printer. This automatic shaking device guarantees you a correct and 100% repeatable procedure independent from the person loading the ceramic ink into the Durst Gamma printer. Due to the sedimentation behavior of ceramic inks, a proper shaking of the ink cubitainer right before loading will positively influence the reliability of your digital ceramic printers.

Technical Data Power Supply: 200-240V AC, 50/60 cycles (L, N, PE) - to be connected directly to the mains or via the auxiliary power socket of Durst Gamma Power Consumption: 100VA Weight: approx. 60kg Dimensions ((LxWxH): 550x650x900mm Features • Simple to operate control panel - Two push buttons (Start button with preset shaking time and Stop button to interrupt shaking) • Emergency Stop - Cuts power to machine immediately • Door Sensor - Shaker will not operate until door is closed. • Easy to load ink cubitainer® from top • Accommodates 10L and 5L Durst Gamma cubitainer® • Equipped with wheels...