*mydirectindustry

Catalogs
DURAG GROUP
HM-1400 TRX 2 - MERCURY CEMS ANALYZER

HM-1400 TRX 2 - MERCURY CEMS ANALYZER

Product catalog summary

Overview: The HM-1400 TRX 2 is a total mercury analyzer designed for continuous mercury analysis in flue or process gas. It is QAL1 certified according to EN 15267 and features a simple design with low instrument air consumption. The device is suitable for process control of mercury mitigation measures and offers a speciation option.

Features:

Stable measured values and maximum daily average values.
Suitable for daily average values less than 10 μg/m3.
Easy operation and cost savings through process optimization.
Reduced operational costs and high device availability.
Efficient service due to reduced maintenance requirements.

Technical Data:

Measuring Values: Total mercury concentration (Hgtotal) or elemental mercury concentration (Hg0).
Measuring Principle: Atomic absorption spectroscopy with a mercury lamp at 253.7 nm.
Measuring Ranges: 0 to 10 µg/m3, 0 to 400 µg/m3, 0 to 3,000 µg/m3 depending on design.
Certified Measuring Ranges: 0 to 15 µg/m3, 0 to 45 μg/m3, 0 to 75 μg/m3.
Certificates: CE, QAL1 EN 15267-1, EN 15267-2, EN 15267-3, EN 14181, MCERTS.
Operating Conditions: Temperature up to +300 °C, relative humidity 0 to 100%, inner duct pressure -50 to +20 hPa.
Ambient Temperature: 0 to +50 °C.
Automatic Control Functions: Leak test, zero point measurement, reference point measurement with HgCl2 reference gas.
Conversion: Thermocatalytic reduction at 300 °C with two chambers per reactor.
Interface: Analog output, digital input, and digital output with configurable parameters.
Operation: Display and operating unit in front door, remote access via TCP/IP.
Instrument Air Supply: Required for dilution or internal drift check with reference gas.
Operating Voltage: 230/400 V, 50 Hz, maximum 10 kVA.
Energy Demand: 0.5 kWh/h.
IP Class: IP54.
Material: Sheet steel cabinet, painted.
Dimensions: 1,700 x 800 x 500 mm.
Weight: Approx. 220 to 250 kg.

Sampling System:

Components: Sampling probe, sampling tube, heated sample gas line.
Sampling Probe: Heated with integrated temperature sensor.
Sampling Tube: Heated, available in lengths of 600, 1,000, or 1,500 mm.
Sample Gas Line: Temperature-regulated, minimum 185 °C, maximum length 40 m.
Process Connection: Flange DN65 PN6.

Contact Information: DURAG GMBH, Kollaustr. 105, 22453 Hamburg, Germany. Phone: +49 40 554 218-0, Email: [email protected].

Catalog excerpts

HM-1400 TRX 2 Total mercury analyzer Continuous mercury analysis in flue or process gas • QAL1 certified according to EN 15267 • Measuring principle allows specification • Automatic reference point check with internal reference gas genera

Open the catalog to page 1

• Stable measured values and maximum of daily average values • Suitable for daily average values < 10 μg/m3 • Easy operation • Cost savings due to process optimization • Reduced operational cost • High availability of the device • Efficient service as a result of reduced maintenance requirements Continuous mercury analysis Smallest certified measuring range 0 …15 µg/m3* Simple design Process control of mercury mitigation measures with speciation option • Low instrument air consumption • Internal reference gas generator for automatic reference point measurement • Maintenance: Fast system cooling...

Open the catalog to page 2

All DURAG GROUP catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list