1. Catalogs
  2. DURAG GROUP
  3. D-R 808 In situ dust monitor for stack emission compliance

D-R 808 In situ dust monitor for stack emission compliance

D-R 808 In situ dust monitor for stack emission compliance

D-R 808 In situ dust monitor for stack emission compliance

Product catalog summary
Overview: The D-R 808 is an in situ dust monitor designed for high-quality monitoring of particulate concentrations in dry flue gas flows. It is certified and approved for continuous emissions monitoring systems (CEMS) and complies with international standards.
Certifications and Compliance:
  • QAL1 certified according to EN 15267 and EN 14181.
  • Compliant with US EPA 40 CFR 60 PS 11.
  • ATEX and IECEx certified for hazardous environments.
Features:
  • Single-sided installation eliminates optical alignment needs.
  • Automatic control functions and simplified audit process.
  • Pressure-controlled purge air system for protection during failures.
  • User-friendly design for easy installation and maintenance.
  • Status-dependent indicator light for immediate feedback.
Technical Data:
  • Measuring principle: Forward scattering, in situ, continuous.
  • Measuring range: 0 to 300 mg/m³, certified range 0 to 7.5 mg/m³.
  • Operating conditions: Temperature up to 350°C (optional 500°C), relative humidity 0-95%.
  • Interfaces: Analogue and digital outputs, RS 485 Modbus RTU, USB.
  • Explosion protection: ATEX and IECEx options available.
System Components:
  • D-R 808 dust monitor.
  • D-ESI 100 software for remote access.
  • Terminal boxes and operating units for data acquisition and processing.
Benefits:
  • Ensures plant compliance with international emission standards.
  • Advanced measurement accuracy using forward scattering technology.
  • Suitable for high-temperature stacks and hazardous zones.
  • Reduced maintenance and cost of ownership.
Comprehensive Solutions: DURAG GROUP offers a wide range of solutions for combustion optimization, safety, and environmental compliance, supported by a global network for local commissioning and services.
See more

Catalog excerpts

D-R 808 In situ dust monitor for stack emission compliance-1

D-R 808 In situ dust monitor Certified and approved PM CEMS providing very high quality monitoring of very low to medium particulate concentrations in dry flue gas flows. QAL1 certified in accordance with EN 15267 and EN 14181 Compliant with US EPA 40 CFR 60 PS 11 Automatic control functions NEW: ATEX and IECEx cert

 Open the catalog to page 1
D-R 808 In situ dust monitor for stack emission compliance-2

ONE COMPANY | COMPREHENSIVE SOLUTIONS • Local support, global reach: benefit from local commissioning and services through our extensive network of partners and corporate organizations, ensuring prompt assistance and expertise wherever you are. There's no need to send the device back to factory. • One company, comprehensive solutions: DURAG GROUP offers a comprehensive solution for your plant, from combustion optimization and safety to the environmental compliance and atmospheric impact. • C ertified for the range of 0 to 7.5 mg/m3, the lowest range achievable for a dust CEMS (continuous emissions...

 Open the catalog to page 2
D-R 808 In situ dust monitor for stack emission compliance-3

D-R 808 | DIMENSIONS AND WEIGHT OF DIFFERENT PRODUC T VARI ANTS Product variant, probe length 400 mm Product variant, probe length 800 mm EX AMPLES OF SYSTEM CONFIGUR ATIONS* | STANDARD + OPTIONAL WITH REMOTE ACCESS 1 Dust monitor 2 Terminal box with/without purge air unit 3 Operating unit 4 Data acquisition, processing + reporting (D-EMS 2020) 5 PC with Windows operating system and software (D-ESI 100) • E asy to use, easy to report emissions – in combination with DURAG Emission DAHS, the D-EMS 2020, and the LaserCEM for multi-gas monitoring, tracking ELVs and sharing emissions reports with...

 Open the catalog to page 3
D-R 808 In situ dust monitor for stack emission compliance-4

© DURAG GROUP 05/2024 | Subject to change DURAG GROUP Kollaustr. 105 22453 Hamburg, Germany Phone +49 40 554218-0 [email protected] DURAG.COM

 Open the catalog to page 4

All DURAG GROUP catalogs and technical brochures

  1. D-LX 201

    6  Pages

  2. D-LX 110

    6  Pages

  3. D-EMS 2020

    6  Pages

  4. D-ZL

    1  Page

  5. D-LX 200

    4  Pages

  6. D-LX 201/721

    6  Pages

  7. D-LX 100

    1  Page

  8. D-HG 500

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.