Dura-Belt brochure 2012
16Pages

URETHANE BELTING POLY-V BELTS DRIVE & IDLER PULLEYS LINESHAFT SPOOLS & C-CLIPS SPEEDY BELT INSTALLER

Y ROUND O-RING BELTS Features: Cross-sections from 1/16" to 3/4", also standard O-ring and millimeter sizes. Any length above 3.3" cut length (depends upon cord cross- section). Durometers from 70A to 100A, also 55D. Available in many colors and textures. Very economical — no tooling charge. Best resilience of any elastic material. Tough and durable — highly resistant to cuts and abrasion. Non-marking. Won't fray. Fits round or V-pulleys. Easily cleaned. Resistant to fuels and oils. Most are Food Grade USDA/FDA approved. Available with UV resistance. Also available in Anti-Static (Static...

^ MOTORIZED ROLLER BELTS Long-Life Hi-Tension O-ring belt. Color: "Post Office Blue" million sold. In service for up to 9 years, running 24 hrs/day 7 days/wk in postal facilities and still going strong ~ even though some tubs are overweight and have soft stronger than the original. Long-Life Hi-Tension O-ring belt. more drive than 3/16" belt. For Used on curves in postal facil- ities. Also for use on merges where greater drive is needed. Long-Life Hi-Tension O-ring belt. Color: Translucent green. Has 54% more drive than 3/16" belt. lbs. Slims down to .21" dia when stretched 20%, flush with...

QUICK CONNECT ™ TWISTED BELTS Twisted Belts Installs in seconds with the Speedy Belt Installer™, eliminating costly downtime. Lengths from 2" up. Measure them from tip to tip, excluding the hook. Cross sections from 3/32" to 1" diameter. Available in many colors. Durometers 83A, 85A and 88A. Because they are coiled like a spring, twisted belts are stretched more than O-ring belts. Most O-ring belts are stretched 12%, while twisted belts are typically stretched 17%. When ordering specify easy-to-install stainless steel hooks or long-life plastic hooks. Ends of stainless steel hooks are bent...

SPEEDY BELT INSTALLER Installs a belt in as little as 25 seconds! Up to 10 times faster than other methods. No need to drop rollers. No more sore fingers or hands. OSHA friendly — Helps prevent carpal Frees up both hands. Also un-installs belts quickly. Pays for itself the first day you use it. Money back guarantee. Works with most twisted belts. Works with steel or plastic hooks. For line-shaft, slave, and powered rollers. Includes two fishing tools — claw and Made from sturdy 13-gauge stainless steel. Will not rust. 10% off when purchased with 100 of our Twisted Quick-Connect™ Belts....

• Solid elastic urethane • Any width up to 12". Special orders to 36" wide. • Colors: clear, black, and orange. under Flat Belt Tracking Sleeves • Crowns rollers — prevents flat belts from walking • Fits under flat belt. • Easily installed with our RAVE® technique • Stays put. Will not move. Boxes slide easily over the snag resietant belt. Anti-Snag Flat Belt • Helps prevent boxes from dislodging belts. • Shiny side has high coefficient of friction. • Matte side has lower coefficient of friction. Low Cost Flat Belts drive 20 rollers/zone Solid 83A urethane. Elastic. wide. Ideal for long MDR...

Urethane V-belts are designed for fractional horse- power or light weight belting applications. They are usually not well suited for high horse power or timing belt applications. Features include: • Most styles, sizes, colors and materials (urethane • With or without cogs. Cogs on the bottom of the belt allow the belt to go around smaller pulleys. With or without polyester Dura-Belt's Super-Strong Welds allow the belt to run on smaller pulleys with sharp back bends. -Width^ Height Height v_Be|t Y Hytrel Polyester -- Harsh Environment Belts Chemical Resistant Belts

Y Poly-V Belts - Move enormous loads on up to 40 rollers PJ-Section: 2.34mm ribs pitch Ribs Moves boxes up to ConveyXonic™ rubber poly-V belts are the Cadillac of poly-V belts, providing extremely long life - up to 10 years or more. Special rubber ribs have a high coefficient of friction, yet are probably the most abrasive resistant of any poly-V belt. Ideal for curves and skewed rollers. DuraBelt polyurethane poly-V resistant. They provide the same tension and static coefficient of friction as ConveyXonic belts, yet cost much less. However, they are not as abrasive resistant, so they...

^ Static Dissipative Belts Cyclothane-SD urethane's resistivity is so low that it is classified as "static dissipative" because it eliminates static faster than "anti-static" materials. • Probably the lowest resistivity of any solid urethane O-ring belt. • Contains no carbon particles that can abrade off and short-out electronics. • Resistivity remains constant — will not decrease when • Translucent baby blue color. • Solid Cyclothane-SD belts: Volume resistivity 2 x 109 ohms-cm. Surface resistivity 2 x 109 ohms/sq. Static decay rate <0.01 seconds. Anti-Vibration Belts • Minimizes...

► Urethane, Polyester & PVC Extruded Cord • Round Cord. ► Belt Splicing Kits & Tools Standard Duty Welding Kit • Standard heat wand - 40 watts high efficiency. Teflon coated tip. Welds urethane round belts up to 1/2" diameter, vee belts up to B-section, and flat belts up to 1" wide. Includes wand • Cord cutter - replaceable blade cuts ends • Black anodized aluminum gripper — Plier-like stress-free handle. Precisely holds round, vee, and flat cord (up to 1.75" wide). Built-in spacer helps ensure consistent alignment. • Trimming clipper — cuts off weld flash (burr). • Standard carrying case -...

^^^^^^^^^^^^^^^^^^^^^m Flat belts available in any width up to 18" • Thermoplastic Orange 83A/85A Urethane Belts. • Belts made endless with our Super Strong • Round, Vee, Flat, Twisted & Hollow profiles welds are warranted against breaking with the with or without polyester reinforcement. World's Best* Belt Warranty *see backpage or website. • FDA approved. Metal detectable versions. • Fin & cleat joints are virtually unbreakable. ► Rough Green Belting Dura-Belt rough green round belts are made from 88A durometer urethane cord. The hard, rough surface is texturized to provide a lower...