Tychem® Reflector Technical Data Sheet
2Pages

{{requestButtons}}

Catalog excerpts

Tychem® Reflector Technical Data Sheet - 1

DuPont™ Tychem® Reflector® Single-skin Chemical Holdout Chemical Warfare Agents Minimum Detectable Time, Permeation Rate Agent Protocol min µg/cm2/min When you need chemical protection in emergency situations, choose a DuPont™ Tychem® Reflector® NFPA 1991 (2005 edition) certified suit, the first limited-use garment certified to NFPA 1991 (2005 edition) in a single-skin multi-layer construction. Excellent chemical holdout protection in one Level A garment that is easy to don and doff, Tychem® Reflector® is often the garment of choice for HazMat duty in emergency situations. The Tychem® Reflector® front-entry, expanded back, Level A, NFPA 1991 certified suit is silver in color. GA, Tabun GB, Sarin GD, Soman HD, Sulfur Mustard L, Lewisite VX, Nerve Agent Fabric Test Protocols. All tests performed in triplicate for DuPont Personal Protection by an independent accredited laboratory at 22°C, 50% R.H. Protocol DN3 — MIL -STD-282, Method T-209 (HD) or modified for Lewisite, for 12 hr at 10 g/m2. Protocol DN4 — MIL -STD-282, Method T-209 (HD) or modified for Lewisite, for 12 hr at 10 g/m2 (total coverage). Protocol DN5 — MIL -STD-282, Method T-208 (GB) or modified for GA, GD, and VX, for 12 hr at 10 g/m2. Protocol DN6 — MIL -STD-282, Method T-208 (GB) or modified for GA, GD, and VX, for 12 hr at 10 g/m2 (total coverage). Physical Properties of Tychem® Reflector® Basis Weight, ASTM D751 Ball Burst, ASTM D750 Grab Tensile Strength, md/cd, ASTM D751 Puncture Propagation Tear, md/cd, ASTM D751 Trap Tear, md/cd, ASTM D5597 These results are measured using the latest ASTM test methods. Results will vary due to the changes in test methods. A true test of performance is in use.

Open the catalog to page 1
Tychem® Reflector Technical Data Sheet - 2

Permeation Data for ASTM Recommended List of Chemicals for Evaluating Protective Clothing Materials (ASTM F1001) ndex of Codes: > = greater than; < = less than; L = liquid; G = gas Numbers reported are averages of samples tested by the ASTM F739 test method. Sample results do vary and therefore averages for these results Personal Protection Product safety information is available upon request. This information corresponds to our current knowledge on the subject. It is offered solely to provide possible suggestions for your own determinations. It is not intended, however, to substitute for...

Open the catalog to page 2

All DuPont Personal Protection catalogs and technical brochures

Archived catalogs