Tear strength From light duty up to the very heaviest, toughest materials. Wear resistance J ■ Exclusively manufactured in The Netherlands. ■ Outstanding wear & tear resistance. ■ Full range of top-quality cover compounds - abrasion, heat (+400 °C), fire, oil and cold resistant (-60 °C). ■ Fully ozone & UV resistant. ■ Available in widths up to 2200 mm wide. ■ Environmentally safe - compliant with EU REACH and Regulation (EU) No 2019/1021 on persistent organic pollutants. ■ Tensile strengths available from 250 N/mm up to 3150 N/mm. ■ Excellent adhesion of covers and carcass plies ■ Two-year warranty against faulty workmanship and/or materials. CONVEYOR BELTING Superfort cross-section 1 The minimum (min) temperatures specified in this document refer to the ambient temperature of the surrounding area. The continious (cont.) and peak temperatures relate to the material that is to be transported on a conveyor belt. For elevator belts other values apply. 2 In some cases (with products containing high concentrations of animal and vegetable oils) ROS should be selected. 3 K = fire retardant with covers, S = fire retardant with and without covers. 4 Limited to specific belt constructions.

rrjyjygj? ^.piyjvxop CONVEYOR BELTING The cost-effective solution to a wide range of demands. SUPERFORT PRODUCT RANGE v 1 Diameter for belt-loads from 60% up to 100%. For 2 The load support of a belt is a factor of the belt width, belt strength and bulk material density. The lower loads a smaller diameter can also be suitable. table indicates the limits for correct load support, based on three idlers of the same length set at 30°. Determine the total belt thickness. excluding fire resistant belts excluding fire resistant belts for which other weights apply “We have tested many different belts...