VWB4900
2Pages

Catalog excerpts

Intelligent Assembly Solutions SPECIFICATIONS • Electromechanical vibration head assembly (200-240Hz) • Super rigid four rail table slide system • One piece flame cut bridge (heaviest in class, in the industry) • Solid state 50hp digital vibration drive • Hydraulic lift/clamp force max. 5,500 lbs. (31,000 N), 20 gallon (75.6 L) reservoir • Allen-Bradley Compactlogix controller with add-on expansion available • Allen-Bradley Panelview Plus 700 full color touch sceen HMI • Intuitive and interactive comprehensive help menu • Part parameter monitoring with programmable limits • Language capabilities, English and Spanish • Automatic tuning with auto ping mode • Programmable amplitude 0.020" to 0.070" (0.5 to 1.8 mm) • Weld by time or weld by distance (absolute or collapsed) • Interior work light • Optical zero force cycle activation switches • Light Curtain for single switch activation • Dual external utility outlets • Programmable amplitude and pressure profile, up to 5 steps • Table size 72" x 24" (1829mm x 610mm) (also max. tool size*) • Table opening 58" by 12" (1470 x 305) with max. depth 20" (500mm) [except F/B center strip 3" (75 mm) wide with depth V2" (12 mm)]** • Upper tool weight 110-200 pounds (50-90kg) • Low 41" (1040mm) lift table height • 20" (500mm) Stroke, 25" (630mm) Max daylight • Door opening 26" high x 76" wide (660mm x 1931mm) • Less than 80 dB in operation (continuous measurement) OPTIONS • Position adjustable cycle activation switches • Exterior work light • Customer-specified PLC and HMI interface (Siemens or Mitsubishi) • Custom paint per customer specification • Rear sliding door for pass-through operation • Programmable pneumatic clamp or eject valves and/ or programmable part-in-place sensing • Custom quoted machines with non-standard: frame sizes, lift tables, stroke lengths, etc., using standard vibration heads available. * Tooling can in some instances overhang the back of the table by a modest amount. Consult Dukane for more information. ** Custom lift table or custom frame can be quoted to allow for an uninterrupted bucket of greater depth. www.dukane.com/us • e-mail: ussales@dukane.com Dukane Corporation • Ultrasonics Division • 2900 Dukane Drive • St. Charles, Illinois 60174

Open the catalog to page 1

1) OUTLINE DRAWING SHOWS EXTERNAL DIMS. ONLY. 2) FRONT SLIDING DOOR RAISES TO CLOSE OFF OPENING. 3) LIFT TABLE LOAD HEIGHT IS PROGRAMMABLE. 5) AIR REQUIREMENT: MIN 75 PSI 1 SCFM. CLEAN, DRY. 6) MACHINE WEIGHT: APPROX. 7,800 LBS Front Electric Service Required: 480V, 3 Phase, 40 Amps (custom input voltage kits available) Pneumatic Service Required: 75 to 90PSI (5-6 Bar) Approximate Shipping Weight 7800 lbs, (3546 kg) Note: All specifications are subject to change without notice. Please consult Dukane for any updated information.

Open the catalog to page 2