Catalogs >
Dukane Intelligent Assembly Solutions >
VWB4900 - Vibration Welder

VWB4900 - Vibration Welder
2Pages

Catalog excerpts

Intelligent Assembly Solutions Vibration Welder • Electromechanical vibration head assembly (200-240Hz) • Super rigid four rail table slide system • One piece flame cut bridge (heaviest in class, in the industry) • Solid state 50hp digital vibration drive • Hydraulic lift/clamp force max. 5,500 lbs. (31,000 N), 20 gallon (75.6 L) reservoir • Allen-Bradley Compactlogix controller with add-on expansion available • Allen-Bradley Panelview Plus 700 full color touch sceen HMI • Intuitive and interactive comprehensive help menu • Part parameter monitoring with programmable limits • Language capabilities, English and Spanish • Automatic tuning with auto ping mode • Programmable amplitude 0.020" to 0.070" (0.5 to 1.8 mm) • Weld by time or weld by distance (absolute or collapsed) • Interior work light • Optical zero force cycle activation switches • Light Curtain for single switch activation • Dual external utility outlets • Programmable amplitude and pressure profile, up to 5 steps • Table size 72" x 24" (1829mm x 610mm) (also max. tool size*) • Table opening 58” by 12” (1470 x 305) with max. depth 20” (500mm) [except F/B center strip 3” (75mm) wide with depth ½” (12mm)]** • Upper tool weight 110-200 pounds (50-90kg) • Low 41" (1040mm) lift table height • 20" (500mm) Stroke, 25" (630mm) Max daylight • Door opening 26" high x 76" wide (660mm x 1931mm) • Less than 80 dB in operation (continuous measurement) OPTIONS • Position adjustable cycle activation switches • Exterior work light • Customer-specified PLC and HMI interface (Siemens or Mitsubishi) • Custom paint per customer specification • Rear sliding door for pass-through operation • Programmable pneumatic clamp or eject valves and/ or programmable part-in-place sensing • Custom quoted machines with non-standard: frame sizes, lift tables, stroke lengths, etc., using standard vibration heads available. * Tooling can in some instances overhang the back of the table by a modest amount. Consult Dukane for more information. ** Custom lift table or custom frame can be quoted to allow for an uninterrupted bucket of greater depth. www.dukane.com/us • e-mail: ussales@dukane.com Dukane Corporation • Ultrasonics Division • 2900 Dukane Drive • St. Charles, Illinois 60174 USA • TEL (630) 797-4900 • FAX (630) 797-4949

Open the catalog to page 1

VWB4900 Vibration Welder Dimensions Plan View 1) OUTLINE DRAWING SHOWS EXTERNAL DIMS. ONLY. 2) FRONT SLIDING DOOR RAISES TO CLOSE OFF OPENING. 3) LIFT TABLE LOAD HEIGHT IS PROGRAMMABLE. 5) AIR REQUIREMENT: MIN 75 PSI 1 SCFM. CLEAN, DRY. MACHINE WEIGHT: APPROX. 7,800 LBS Right Side Fixture hole patterns and dimensions. UPPER TOOL LIFT TABLE Electric Service Required: 480V, 3 Phase, 40 Amps (custom input voltage kits available) Pneumatic Service Required: 75 to 90PSI (5-6 Bar) Approximate Shipping Weight 7800 lbs, (3546 kg) Note: All specifications are subject to change without notice. Please...

Open the catalog to page 2