Intelligent Assembly Solutions Vibration Welder FEATURES • Electromechanical vibration head assembly (200-240 Hz) • Super rigid four rail table slide system • One piece flame cut bridge (heaviest in class)) • Structural tubular steel table (heaviest in class) • Solid state 40 hp digital variable frequency drive • Hydraulic lift / clamp force maximum 5000 lbs. (22,000N) 20 gallon ( 75.6L) reservoir • Allen-Bradley Compactlogix controller with add-on expansion available • Allen-Bradley Panel View 700 full color touch screen HMI • Intuitive and interactive comprehensive help menu • Part parameter monitoring with programmable limits • Programming for up to 5 part in place sensors included (sensors not included) • Programming for up to 4 pneumatic valves included (valves not included) • Programming for vacuum (vacuum generator and valve not included) • Programming for tool ID included. • Language capabilities, English and Spanish • Automatic tuning with auto ping mode • Programmable amplitude 0.020” to 0.070” (.05 to 1.8 mm) • Weld by time or weld by distance (absolute or collapsed) • Programmable Amplitude and Pressure profile up to 5 steps • Interior work light • Optical zero force cycle start activation switches • Light curtain for single switch activation SPECIFICATIONS • Table and maximum lower tool size 52” x 24” (1320 x 610 mm)* • Door Opening 26” high x 55” wide (660 x 1400 mm) • Upper tool weight 90 – 150 lbs. (40 - 68 kg) • Upper tool maximum size 20” x 44” (510 x 1120 mm) • Low 41” (1040 mm) lift table height • 20” (500mm) stroke, 25” (630mm) max. opening • Small 51” x 101” (1.3 x 2.6 m) foot print • 80 dB maximum in operation (continuous measurement) • Pneumatic manifold will support additional 2 valves OPTIONS • Position adjustable cycle activation switches • Exterior work light • PLC options for Siemens or Mitsubishi available • Custom paint specification • Rear sliding door for pass through operation • Programmable pneumatic valves for clamps and slides • Programmable part-in-place sensing. * Tooling can in some instances overhang the back of the table by a modest amount. Consult Dukane for more information. ** Custom lift table or custom frame can be quoted to allow for an uninterrupted bucket of greater depth. www.dukane.com/us • e-mail: [email protected] Dukane Corporation • Ultrasonics Division • 2900 Dukane Drive • St. Charles, Illinois 60174 USA • TEL (630) 797-4900 • FAX (630) 797-4949

Vibration Welder Model VWB4700 Floor Layout DOOR SWING ACCESS HATCH ELECTRICAL DROP PLAN VIEW OPTIONAL EXTERNAL WORK LAMP FDRKUFT TUBES FRONT VIEW RIGHT SIDE Fixture hole patterns and dimensions LIFT TABLE HOLE PATTERN UPPER TOOL BOLT PATTERN Note: All specifications are subject to change without notice. Please consult Dukane Ultrasonics for any updated information.