Catalogs >
Dukane Intelligent Assembly Solutions >
Dukane Patented MPC* Multi - Point Control

Dukane Patented MPC* Multi - Point Control
2Pages

Catalog excerpts

Dukane Patented MPC* Multi - Point Control - 1

Multi - Point Control The MPC unit is designed for assembly systems where one ultrasonic power supply is sequenced to several ultrasonic probes. Our unique Control and Process Monitoring Profile is available for each individual probe when coupled with a Dukane DPC \\Plus or any of the iQ Series ultrasonic generator. Control Features ► Weld by Peak power Process Monitoring ► Suspect or Bad Part Limits ► Min - Max Weld Peak Power MPC 8 Probe Panel Mount MPC stand-alone module can be mounted in a through panel configuration as pictured here or as an internal card for DPC series power supplies. MPC has the ability to sequence up to 16 probes or converters and can be purchased from 2 to 1 6 point control. Color-coded status LED's insure ease of system operation and field troubleshooting. The MPC module can be used with all frequency and power levels of ultrasonic systems. System Status Indicator Displays System Active and Faults ■ Green indicates system OK ■ Orange indicates non critical fault ■ Red Indicates critical fault Probe Selection Indicator ■ Green indicates probe channel I Red indicates ultrasonics active Intelligent Assembly Solutions

Open the catalog to page 1

Dukane Patented MPC* Multi - Point Control - 2

MPC Configurations Connect up to 16 Probes Cable 200-615 Some of the patented features include: • Fully protected from improper programming and power line irregularities. • Binary coded selection inputs prevents selection of 2 probe relays. • Logic interlocks prevent selection changes when ultrasound is on. • Ring-down monitor allows relay switching only when voltage is off. MPC Controllers • Fault monitor detects a shorted relay coil driver and halts operation. • Hold-up time of internal supplies - designed to ride-out any line problem. Eliminate equipment failures due to improper machine...

Open the catalog to page 2