938 series
6Pages

finest atomisation - Process engineering - Spray drying - Tobacco industry

www.duesen-schlick.de Schlick two-substance nozzles for finest atomisation • The 938, 848, 0/28 and 0/48 Models can fully atomise liquids to get a large specific surface with the help of atomising air, steam, or gas. • These nozzles can atomise liquids to a far finer degree than other two-substance nozzles. • The nozzles are of modular design and available in several forms. • The liquid pressure differential can be used to control the flow rate on all models. • On models with a control needle the needle setting can also be used to control the flow rate. This provides a larger range of...

www.duesen-schlick.de Nozzle designs Form 5 As Form 4, but with graduations on the liquid control needle for fine setting of the flow rate, designed for experiments, laboratories, etc. Fig. 18003 Form 6 With straight (centrical) fluid feed Fig. 18004 Form 7 Pneumatically controlled using the atomising air. The nozzle needle closes the orifice automatically and abruptly when the atomising air is shut off. Especially suitable for etching, marking, cyclic spraying and above all for liquids under pressure where drips are to be avoided. Fig. 18005 Form 7-1 As Form 7, but with control by control...

Atomizing technologies Acid resistant stainless steel Heat resistant stainless steel Custom products from other materials available on request Performance specification Models 938 and 0/28 with straight air feed Model 0/48 with double air feed Model 848 with double air feed Droplet size Droplet distribution Mean volume droplet size (50 microns constant) + Droplet size in microns Water flow rate 0.4 l/min, spray angle 120° -> Atomising air pressure (bar) (P2/P1) critical

Atomizing technologies Custom versions Model 0/28 - Two-substance nozzle Lance version Model 0/48 S4 Form 0 - Two-substance nozzle With double air feed Model 848 SI - Two-substance nozzle Liquid feed from the rear Welded construction Model 0/48 S10 - Two-substance nozzle Right-angled Form With screw fitting

Atomizing technologies Service spectrum Pilot test laboratory Before any new spray nozzles are used we subject them to comprehensive trials in our own test laboratory - if need be to your operational parameters. During these tests, we precisely determine droplet size, velocities and flow densities with our modern DUAL Test nozzles Schlick spray nozzles are world renowned for highest precision. We can offer you the best and most lasting solution to your requirements. you with test nozzles in advance - Take advantage of our comprehensive expertise - from design to installation the...