825-854
6Pages

{{requestButtons}}

Catalog excerpts

825-854 - 1

Atomizing technologies Schlick pmii"in - Process engineering - Spray drying - Tobacco industry

Open the catalog to page 1
825-854 - 2

www.duesen-schlick.de Schlick two-substance nozzles • The 825-854 two-substance nozzles can fully atomise a liquid with the help of an atomising medium. During this process, a very large specific surface is created. The atomising medium can be compressed air, gas, or steam of 0.5 bar upwards. • The performance ranges of the Model 825-854 Series nozzles start at the upper end of the performance ranges of the Model 970 and 940 Series nozzles. • The liquid pressure differential is used to control the flow rate on all models. • As an option, the nozzle’s spray angle can be set between 10° and...

Open the catalog to page 2
825-854 - 3

Atomizing technologies Performance specification Series 825-854 - Two-substance nozzles Atomising air consumption in Normal m3/h at 20 °C

Open the catalog to page 3
825-854 - 4

www.duesen-schlick.de Performance specification Series 825-854 Form 1 – Two-substance nozzle Water flow rate in l/min at 16 °C Series 825-854 Form 0 – Two-substance nozzle Water flow rate in l/min at 16 °C 854 10.0 100 844 5.0 50 834 4.0 40 3.0 30 854 827 2.0 20 844 825 834 0.4 0.3 0.2 0.1 0.01 0.02 0.03 0.04 0.05 0.1 0.2 0.3 0.4 827 5 4 3 825 2 1 ➝ Differential pressure Δp in bar Series 0.5 ➝ Water flow rate in l/min at 16 °C 10 Series ➝ Water flow rate in l/min at 16 °C 1.0 0.1 0.2 0.3 0.4 0.5 1.0 2.0 3.0 4.0 ➝ Differential pressure Δp in bar The curves end at the acceptable flow rates of...

Open the catalog to page 4
825-854 - 5

Atomizing technologies Custom versions Model 827 Form 0 S6 - Two-substance nozzle • The atomising air/gas/steam flow rate is controlled with shims • Simple construction • For spraying of suspensions and dispersions Model 834 Form 0 S7 - Two-substance nozzle With conical (NPT) screw fitting Model 854 Form 1 - Two-substance assembly With flange connection and PVC protective cap

Open the catalog to page 5
825-854 - 6

Atomizing technologies Service spectrum Pilot test laboratory Before any new spray nozzles are used we subject them to comprehensive trials in our own test laboratory - if need be to your operational parameters. During these tests, we precisely determine droplet size, velocities and flow densities with our modern DUAL Test nozzles Schlick spray nozzles are world renowned for highest precision. We can offer you the best and most lasting solution to your requirements. you with test nozzles in advance - Take advantage of our comprehensive expertise - from design to installation the...

Open the catalog to page 6

All Düsen-Schlick GmbH catalogs and technical brochures

  1. Nozzle heads

    12 Pages

  2. mix nozzle

    6 Pages

  3. 938 series

    6 Pages

  4. 0206

    6 Pages