Environment cabinet - for water polluting substances

Product catalog summary

Environment Cabinets Overview
Environment cabinets are designed for the safe and correct storage of non-flammable liquids and water-polluting substances classified under WGK 1-3 in small containers. These cabinets are not suitable for storing flammable liquids.

Key Features

Air vents located in the rear panel for ventilation.
Anti-tilt mechanism for collection trays.
Adjustable bases to level out floor unevenness.

Models and Specifications

Environment Cabinet LS 1: Dimensions: 950mm (W) x 420mm (D) x 1016mm (H), 2 collection trays, 1mm material thickness, 16L collection volume per tray, 50kg load bearing capacity, Ref. no. 20-101046-001.
Environment Cabinet LS 2: Similar dimensions as LS 1, but with 3mm material thickness and 20L collection volume per tray, 75kg load bearing capacity, Ref. no. 20-101046-003.
Environment Cabinet L 1: Dimensions: 950mm (W) x 420mm (D) x 1950mm (H), 4 collection trays, 1mm material thickness, 16L collection volume per tray, 50kg load bearing capacity, Ref. no. 20-201046-001.
Environment Cabinet L 2: Similar dimensions as L 1, but with 3mm material thickness and 20L collection volume per tray, 75kg load bearing capacity, Ref. no. 20-201046-003.

Accessories

Additional collection trays available for models LS 1, L 1, LS 2, and L 2 with specific dimensions and load capacities.

Compliance and Construction

Complies with the German Equipment and Product Safety Law (GS mark).
Collection trays manufactured according to Art 19 l Wasserhaushaltsgesetz (WHG - Water Management Act).
Constructed from sheet steel, RAL 7035 light grey, with torsion-resistant wing doors and security locks.
Height-adjustable collection trays with optional material thicknesses and national technical approvals.

Catalog excerpts

Environment cabinet - for water polluting substances-1

New Environment cabinets 1.11 Environment cabinets For safe and correct storage of non-flammable liquids and water polluting substances WGK 1-3 in small containers. This product complies with the requirements of the German Equipment and Product Safety Law (GS mark). The collection trays are made by a specialist firm in ccordance with Art 19 l Wasserhaushaltsgea setz (WHG - Water Management Act). Sheet steel cabinet, RAL 7035 - light grey. Torsion resistant wing doors with box stiffe- ners, RAL 7035 - lichtgrau. Closed using turning handle with security lock, locks on 3 sides. Magnetic pocket for DIN A5 documents. Height-adjustable collection trays, galvanised optional material thickness 1 mm with general national technical approval Z-38.5-197 issued by DIBt Berlin or material thickness 3 mm with declaration of conformity (ÜHP) according to StawaR. Anti-tilt of the collection trays by locking device. 4 adjustable bases for alignment of floor unevenness for model L-1 and L-2. Ventilation through air vents in the rear panel of the cabinet for model L-1 und L-2. Note Not suitable for storage of flammable liquids. Environment cabinet L 1 and Air vents in the cabinet rear panel Anti-tilt of the collection trays Adjusting bases for to level out unevenness in the floor Ordering information/Technical data/Dimensions Model Width Depth Height No. Material thickness Collection volume/ Load bearing*/ Ref. no. in mm in mm in mm collection collection trays collection tray collection tray trays in mm in l in kg Accessories - Additional collection tray for models LS 1, L 1 - Additional collection tray for models LS 2, L 2 *Load bearing capacity with uniformly distributed load DUEPERTHAL SICHERHEITSTECHNIK GMBH & CO. KG Frankenstrasse 3, 63791 Karlstein, Germany

Open the catalog to page 1