Thrust Resisting Joints
10Pages

Thrust Resisting Joints Plug-In Joints – The Clever Alternative

Efficient and Safe The basis of a constantly further developing techno- But varying requirements call for measures logy of connection systems is the non-flanged instal- adapted to their specific needs. Depending on the lation. With flangeless plug-in socket- and thrust- application field, Düker therefore recommends resisting joint systems by Düker, cast iron pipes, the appropriate thrust resisting joint for the fittings and valves are connected safely within intended purpose: all water pipelines – among each other as well as with plastic pipes. • MU or DÜKER SPEZIAL for secure connecS tions...

Reduced time, cost and material With the positive features of socket connections, such as reduced mounting time, less material and expenditure as well as reduced stock-keeping, Düker offers secure pipeline connections that save time, cost and material compared to flanged connections. Adequate thrust resisting joints enable secure, but nevertheless movable connections in various application fields. Installed quick and easy - socket joint with only 19 assembling pieces. The installation time of Düker plug-in socket joints is substantially reduced due to the elimination of concrete blocks, and...

Flangeless Socket Systems by Düker at a Glance Besides the deviation capability and the integral corrosion protection, thrust resisting joints offer convincing technical and economical advantages compared to conventional flanged systems: SMU/Düker SPEZIAL Tyton® SIT® The complete program In addition, Düker offers a complete fitting and no additional corrosion problems fast installation fast installation fast installation fast installation valve program with coatings for the application in drinking, raw, industrial and waste water. Our coating program includes cement mortar, epoxy and in...

Clear Structure – for any Application Field Screwed socket gliding ring screwed ring chamfered locking ring screwed ring SPEZIAL cast iron pipe TYTON® SIT® DN 80 - 400 marking ring TYTON® SIT® ring cast iron pipe Novo socket marking ring TYTON SIT PLUS® ring Novo socket= TYTON® socket + Novo pre-chamber NOVO-SIT® DN 80 - 800 TYTON® gasket NOVO-SIT® ring cast iron pipe NOVO-Grip® III diameters: 90 / 110 / 160 / 225 GKS gasket

Plug-in Joints by Düker – Cost-Efficient, Time SMU/ Düker SPEZIAL – Thrust resisting joints for screwed connections The thrust resisting joints SMU and Düker SPEZIAL With the sliding bevel at the screwed ring, a radial force is produced with the for screwed connections are the ideal solution for locking ring, which results in a secure locking with the spigot end. At the same the connection of grey cast iron with modern pipe time, an axial force is transferred through the gliding ring onto the sealing materials. In addition, Düker SPEZIAL permits a gasket, which ensures the necessary sealing...

e-Saving and Safe TYTON® SIT® / TYTON SIT PLUS® – Thrust resisting plug-in socket connection for cast iron pipelines The systems TYTON® SIT® and TYTON SIT PLUS® secure an economical This thrust-resisting joint is internally equipped laying of pipeline systems, particularly for town areas as well as for cross- with a special gasket armed with corrosionfree chromium steel retaining segments country pipelines. vulcanized into the ring. By using this TYTON With the system TYTON SIT , developed by Düker, the non-secured TYTON ® SIT PLUS® ring the thrust forces are absorbed in- joint is converted...

NOVO-SIT® – Thrust resisting joint for metallic pipelines up to DN 800 The patented thrust resisting plug-in socket con- nection NOVO-SIT is a further development on ® the world wide installed and proven thrust resisting joint system TYTON® SIT® / TYTON SIT PLUS® to Pressure class Pressure class connect cast iron pipelines – for larger nominal dimensions and higher pressures! line materials are possible. This includes both cast iron and plastic pipe connections. The operating mode is brilliant and easy. The TYTON ring guarantees sealing. The NOVO-SIT The pre-condition for this system is the...

NOVO-Grip® III – Thrust resisting joint for PE-HD pipes With the same socket technology as NOVO-SIT®, which grip the outside surface of the PE-HD pipe to which separates the sealing and locking functions produce the anti-thrust effect. by a two-chamber system, an efficient laying of fittings and valves in PE-HD pipelines is possible This system compensates the tolerances of the with the thrust resisting joint NOVO-Grip III. pipe and fitting dimensions in an optimal way and produces an absolutely safe and thrust resisting For laying NOVO-Grip III a special sealing ring ® (GKS) has to be...

Fittings And Valves DRAINAGE TECHNOLOGY Engineering GLASS LINING TECHNOLOGies JOBBING FOUNDRY Düker GmbH & Co. KGaA Hauptstraße 39 - 41 D-63846 Laufach Germany Phone +49 6093 87- 560 Fax +49 6093 87-246 732951 / 07.13 Specifications subject to change without notice. Internet: www.dueker.de E-Mail: sales.fittings-valves@dueker.de