“Excellent !” Report on the FE tension analysis of split loose anges NB 25, 40, 80, 100 : The FMEA (failure mode and effect analysis) re- GLASS LINING TECHNOLOGIES vealed that none of the anges exceeded the permissible tension limits. The loose anges are, as a consequence, clearly sufciently dimensioned and, GLASS LINING TECHNOLOGIES as a result, have a high potential safety factor. JOBBING FOUNDRY The following split loose anges were subjected to FMEA for adequate dimensioning: DRAINAGE TECHNOLOGY ENGINEERING flange thickness desired flange thickness actual Loose ange connection Düker GmbH & Co. KGaA Hauptstraße 39-41 D-63846 Laufach Germany Illustration: tension plot, average Phone +49 6093 87 -0 Fax +49 6093 87-246 04.09 Specifications subject to change without notice. Internet: www.dueker.de E-Mail: [email protected]

Snap t, fasten and the job is done ... it couldn’t be easier! Calcu Calculated, tested, tried and proven! The unique Düker snap t ange is a further development based on the well Even under extreme temperature stress the Düker ange connections have known DIN loose anges. The two halves are simply clipped together without leakage rate of ange connections for glass unbeatable low leakage rates ( between 10 –5 and 10–6 mbar l/s ). This is tools and can be mounted with every other conventional ange to provide a lined pipeline parts due to the homogenous introduction of the ange forces. The proven...