etec Enamel in Water Supply Networks
8Pages

etec Enamel in Water Supply Networks High-performance surface protection for fittings and valves

Enamel in the Past and Today The histories of enamel and metal are closely en- the development of new enamel qualities which can be applied in one layer twined. The use of enamel can be proven since the and with reduced layer thicknesses, depending on the requirements, and at that early Bronze Age (1800 B.C.). Numerous civilised remain elastic and shock-resistant. A well-known area of application is the so- peoples of prehistory and early history have left us called “white goods”, household appliances such as washing machines and cultural and artistic objects designed with enamel....

etec Enamel – the Optimum Formula The enamel frits used for etec enamel are a for- melt, a thermal-mechanical pre-treatment of the cast iron surface is inevitable. mula that was specifically made up for Düker. It is The surface is cleaned with abrasive shot blasting material. In addition, this adapted optimally to the requirements of the base process enlarges the surface and therefore allows an optimal adhesion and material ductile cast iron, the manufacturing process and particularly to the necessary resistance and food safety for the use in drinking water For the application as wet...

Complete Enamelling – a Modern and Integra Inside enamel Outside enamel Inside enamel has been the standard lining for all Düker valves since 1957. In Complete enamelling is an enormous challenge for addition, Düker also supplies fittings with inside enamel. The advantages of many manufacturers. In particular for the valves, the inside enamel are obvious: design must be adapted in a way that all surfaces can be enamelled all around and with as few machined Protection against inside corrosion: surfaces as possible. Düker has completely revised Enamel is diffusion-resistant and therefore...

al Surface Protection Enamel defies all weathers A particularly intelligent solution is the use of outside enamel on pillar hydrants, which defy all weathers for decades. Absolutely UV-resistant: Unlike many other materials, enamel does not chalk and maintains its colour intensity for many decades. An important information: chalking is not only an optical problem. When epoxy coatings begin to chalk, the corrosion protection is also affected! Dirt-repellent: Due to its permanently smooth surface, enamel is easy to clean and therefore practically graffiti-resistant. Resistant to climate:...

Certified Quality “Made by Düker” The new DIN 51178 The German DIN standard 51178 “Enamels and Furthermore, the dev association (Deutscher Email Verband, German Enam- Enamelling - valves and pressure pipe fittings ellers' Association) has published “Quality requirements and testing regula- with inside and outside enamel for the supply tions for enamelled cast iron valves and pressure pipe fittings for the supply of raw and drinking water - quality require- of raw and drinking water”. Based on the DIN standard, certain requirements ments and inspection” has replaced DIN 3475, were increased,...

Quality Certified and Documented The observance of DIN 51178 and the dev guidelines for the enamelling of valves and fittings for water supply is not only documented through the Düker quality management system as per EN ISO 9001:2008. On top of this, Düker subjects themselves on a voluntary basis to a regular third-party monitoring by the MPA Hannover institute. A corresponding report about the latest monitoring can be obtained from the factory at any time.

FITTINGS AND VALVES DRAINAGE TECHNOLOGY Engineering GLASS LINING TECHNOLOGIES JOBBING FOUNDRY Düker GmbH & Co. KGaA Hauptstraße 39-41 D-63846 Laufach Germany Phone +49 6093 87- 560 Fax +49 6093 87-246 732643 / 06.13 Specifications subject to change without notice Internet: www.dueker.de E-Mail: sales.fittings-valves@dueker.de