PRODUCT RANGE
24Pages

Route description via the motorway Ai / A43 Follow Ai to exit Munster-Sud. Then take A43 in direction of Wuppertal/Recklinghausen. Leave A 43 at exit Nottuln. After leaving motorway continue in direction Coesfeld on B252 until you pass through Gescher. Then take right turn in direction of Stadtlohn. Drive straight through Stadtlohn until you cross the L572. Then turn right in direction of Ahaus/Rheine. After 5 km turn left. A sign on the L572 indicates the way to our plant. Route description from motorway A2/3 and A31 Follow A2/3 to junction Bottrop. Then change to A31 in direction Gronau....

Index UNI-Mower UMT - UMK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 UNI-Mower PMK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Mowerhead for Wheel-loader and Diggers . . . . . . . . . . . . . . . . . . . . 5 UNI-Mower UM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Large-Area Mower GFM 740 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 UNI-Side Mower USM - SMT - SMK . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Verge Mower RSM 13 . . . . . . . . . . . . . . . . . . . . . . ....

UNI-Mower UMT 10/13/15/18 UMK 16/18/21 The compact construction of the universal usable mower-, mulcher- and crusher machines UMT and UMK makes them specially suitable for small tractors from 13 kW (18 hp) upwards. They are available in working widths of 1.0 meter up to 2.10 metres. The versatile adjustment possibilities of the attachment point of the three-point hydraulic, enables the mounting of the unit onto every three-point coupler. The Uni-Mowers are available as front or rear unit and as combined front and rear unit. UMT 15 with hydraulic drive, front mounting Areas of use The areas...

UNI-Mower PMK 18 / PMK 21 The UNI-Mower PMK is special developed for working in scarp. The mower-unit is intended for front-mounting in the three-point hydraulic of special vehicle, like Aebi or Reform. The unit is pulling over the mounting-truss hunged up, so that an optimum control of the mower-head can take place. A optimum control of the mower-head is guaranteed. A sideswinging is also possible. PMK 18 mounted on Reform Mowerhead for Wheel-Loader and Diggers Front-Flail-Mower serie MK for wheel-loader For mounting in the wheel-loader wing, drive hydraulically of the carrier vehicle. The...

Uni-Mower UM 19/23/27/30/40 Construction The Uni-Mowers UM with working widths from 1.6 - 4 meters are versatile usable mower- mulcher and crusher machines. They are specially suitable for medium-sized and large tractors. The Uni-Mowers are available as front or rear unit and as combined front and rear unit. Flail Shaft - Flail The heavy flails (2 kg) made from spring steel are loosely hung into the flail shaft and secured by means of a screw. During mowing, the centrifugal force brings the beetle into the correct position. Should larger items obstruct during use, the flail moves to the...

Large-Area-Mower GFM 740 3 flail-mower of the series UM Working width: Power requirements: Output per area: Revolution of PTO shaft: Combination UM 27 in front and USM 18 in rear mounting The GFM 740 can be used in closed-building and spitted-building form. The GFM 740 in closed-building form will be operated in thrust way device. The cutting height is central adjustable by the top link and on each mower without any difficulty. The hydraulically control system for relief provide for a protection of the ground and a optimum work result. At hitting on a barrier the mower on the side avoid to...

UNI-Side Mower USM 10/13/15/18/21/26 SMT 15 and SMK 15/18 The Uni-Side Mower USM operates as rear unit in a norm three-point hydraulic, offset next to the vehicle. The USM 10 – 13 are constructed for light trucks, the USM 15 – 26 for middle-sized and heavy trucks. The Uni-Side Mower SMT and SMK operates as front unit, offset next to the vehicle. The Uni-Side Mower is infinitely variable in its working adjustment, so that it is usable on the most difficult slopes and embankments. It is a universally usable mowing and mulching machine for the mowing of: • Verges • Embankments • Fallow land •...

SMT in transport position on a tractor The built-in hydraulic resp. mechanical overload safety fuse avoids damages to the machine in the case of unintended starting at obstacles. In the special equipment the Uni-Side Mower is equipped with a hydraulic side sliding. (USM 15-21, SMK 15-18). When steered from the truck hydraulic, the position can be changed by 60 cm, depending on requirements. Reflector posts, trees and other obstacles can be avoided without problems. By changing the working unit, the Uni-Mower SMT 15 can also be used as brush for wildgrowing herbs. The Uni-Mower SMK is...

Verge Mower RSM 13 The verge mower RSM 13 is operated by a computerized control system, which takes optimum advantage of mowing around reflector posts, road signs and trees. Due to the unique cinematic arrangement of the swivelling point and due to the specially designed run of the mower- head guide, even large surfaces of area to be mowed lying behind crash guides are reached. The mower-head is swivelled to the front and then guided by means of a parallel guided arm. The sliding enables an exact adjustment of the mowing unit, even in very narrow areas. RSM 13 mowing under guiding device...

Outrigger KBM 350 The outrigger KBM 350 is available as combined unit for front and rear mounting on small trucks from 19 kW (25) upwards. A rebuilding from front to rear mounting, or working on right to working on left side is possible. KBM 350 with flail-mower-head in rear-mounting, working on the right The mounting is effected on the three-point hydraulic Cat. I + II. The drive of the working units is effected hydraulically. The integrated hydraulic unit is operated by the PTO-shaft. The control of the extension arms is effected by means of the supplied electro-hydraulic control systems....