Catalog excerpts
IMU-3C is a three-components intelligent monitoring unit, which can carry out three-channel data acquisition. Based on the Mobile communication system, WIFI, Ethernet and other data transmission interfaces, IMU-3C is able to fulfil remote parameter configuration, real-time data transmission, real-time data monitoring and real-time data quality evaluation, etc. Equipped with external sensor connector that compatible with multi-types of sensors. Equipped with external power supply connector that customized for long term data acquisition. Integrate with GNSS module and internal antenna, external GNSS antenna is optional also. A surface wave processing software which developed by DTCC is now available for real-time dispersion, surface wave velocity analysis, inversion and imagining. 16 ports charging case The case is used to recharge at most 16 IMU-3C per batch. 4A charging current, fast charging. World's First Smart Seismic Sensor New Generation 3 Components intelligent monitoring unit Built-in high precision DAC signal generator Externally connected with various sensors Built-in GNSS module, support internal and external GNSS antenna High resolution data with up to 0.25ms sampling and 24-bit delta-sigma ADC Support internal and external power supply Built-in 4G module (support SIM card replacement), achieve real-time data transmission, parameter configuring Built-in WiFi module, data download and parameter configuration at close range External 4G antenna, internal WiFi antenna Dual-LED indicator, indicates the acquisition and data transmission status of device SoloSW surface wave processing software ·Data transmission and dispersion analysis ·1D/2D active surface wave analysis (MASW) ·1D/2D passive surface wave SPAC and ESPAC method
Open the catalog to page 1General Specification Analog channel Sample intervals Preamplifier gain Anti-alias filter DC blocking filter GNSS mode Operating temperature Waterproof Physical Size Weight Data Storage Operating Life@25℃ Data transmission mode External power supply Charging Temperature Range Recharge Time 206.5 Hz @ 2ms (82.6% of Nyquist) - Linear Phase DC Removed Support GPS, BEIDOU, Glonass, single or double mode operation -40℃ ~ +70℃ IP67 4G mode (4G, USB, WiFi)or Ethernet mode (Ethernet, USB, WiFi) 7~ 15V DC (single supply) +3℃ ~ +45℃ ≤7 h Channel Performance (@ 2ms sample interval, 31.25 Hz, 25°C, unless...
Open the catalog to page 2