VF-500-30150 Piezo Amplifier

Product catalog summary

Description: The VF-500-30150 is a high-power electronic device designed to drive piezoelectric systems by amplifying a low voltage analog input signal. It features an optional user interface accessible via a front panel LCD, allowing configuration of DC voltage offset, amplitude, and frequency of an integrated sinusoidal waveform generator. The amplifier can deliver a maximum current of 500mA, with the capability to reach up to 1A for short bursts.

Options: Contact DSM for current option pricing. Available options include output voltages ranging from -30V to +200V and an LCD screen with a sine generator.

Specifications and Features:

Over-current, over-temperature, and short-circuit protection.
Protection against over/under voltage conditions on the power line.

Application Examples: The amplifier is suitable for driving piezo actuators/stages, microscopy devices, material testing equipment, and R&D/university projects.

Technical Specifications:

Output Voltage: -30 to +150V
Input Voltage Signal: -1.5 to +7.5V
Max Peak Current: 1000mAp
Dimensions: 4 x 13 x 9.5 inches (102 x 330 x 241 mm)
Operating Voltage: 100-250 VDC, 50/60Hz, 5.2A
Bandwidth: >4 kHz (-3dB)
Noise: <3 mVrms
Gain: 20 V/V +/-5%
Recommended Min. Capacitance: 500 nF
Connector: SMA

Contact Information: For more information, contact [email protected] or call 615-595-6665. Visit www.dynamic-structures.com for further details.

All DSM catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list