REXA ACTUATOR CABLE
3Pages

REXA Actuator Cables CSA approved Severe services and harsh environments can be found in every industry including; power generation, oil & gas transmission, water treatment or mining & metals. So what's the one thing all these industries have in common? They rely on REXA Electraulic™ actuation to solve their problems. If you need the stability and precision that allows today's power plants to operate at peak performance... REXA has the solution. Our self-contained electro-hydraulic actuators and drives improve control and extend the life of severe service trims from feed water control and recirculation and throughout the steam system. REXA offers configurations for valves and dampers as well as turbine control applications. ShawFlex has partnered with REXA to manufacture cables that meet the electrical requirements of it's devices. Applications • Utility power • Pipeline • Pulp and paper • Water and waste • Additional process • Automation Features • Short runs/custom lengths • Custom configurations • Sunlight resistant • FT4 rated Constructions • Aluminum interlocked armour (AIA) • Steel interlocked armour (SIA) • Verlok® (for mineshaft applications) Approvals • CSA C22.2 NO. 131, Teck 90 cable (Type Teck 90) • CSA C22.2 NO. 239, Armoured Instrumentation • CSA C22.2 NO. 174, Cables & Cable Glands for Use in Hazardous Locations • CSA C22.2 NO. 38, Thermoset Insulated Wires & Cables (XLPE) • XLPE (RW90 rated), 90°C wet/105°C dry • -40°C cold bend/impact • HL rated for use in hazardous locations: - Class I Zone 1 & 2 - Class II Zone 20, 21 (Div 1) Please note: Although the content used for this brochure has been produced and processed from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability or usefulness of

Recommended Cable Lengths The X2 consists of two major components, the Mechanical SubAssembly (MSA) and the Electrical Sub- Assembly (ESA). The MSA is installed on the driven device, while the ESA is remotely mounted. Connecting them are the module cable and the feedback cable. Two additional cables, a motor and a resolver cable, are required for servo power modules. Stepper Module Units Feedback Cable: ShawFlex 69231M1801187RX - 1TR 18/7T OS XLPE AIA PVC 600V CSA Instrumentation Cable HLBCD The feedback cable carries the actuator position to the control enclosure. The maximum current is 20...

Servo Module Units Feedback Cable: ShawFlex 69231M1801187RX - 1TR 18/7T OS XLPE AIA PVC 600V CSA Instrumentation Cable HLBCD The feedback cable carries the actuator position to the control enclosure. The maximum current is 20 mA and the maximum voltage is 15 Vdc. The standard cable consists of three conductors, a tinned copper drain wire and overall foil shielding. Each individual wire is 18 AWG with an approximate cable diameter of 0.691". The feedback cable is not restricted by distance. The feedback cable is a signal level cable and must remain separated from high voltage cables by at...