Wire Tester Catalog
20Pages

{{requestButtons}}

Catalog excerpts

Wire Tester Catalog - 1

Curing control Tangent Delta High Voltage Surface defects

Open the catalog to page 1
Wire Tester Catalog - 2

Wire Test Solutions Optimizing the processes Knowing and controlling the parameters within production of enamelled wire is absolutely crucial for the economy in manufacturing of enamelled wire. DSE Test Solutions has supplied test instruments and solutions for more than 30 years. 30 years in the wire business means, we can offer you  Experience, knowledge and support  Continuous innovation and development  Reliable supplier of instruments, with a remarkable track record Our strategy as a supplier of high quality service and testers: In order to deliver instruments of highest quality and...

Open the catalog to page 2
Wire Tester Catalog - 3

No. 1 in Tangent Delta Tangent Delta Test means controlling the enameling process The Tangent Delta Tester (TgD) from DSE Test Solutions delivers all the information needed for optimising and controlling the many production processes. The measured data are compressed and displayed in a full curve, showing the Tangent Delta as a function of the temperature. Sample More than just time and money saving This method is the ultimate way of making a fast, accurate and reliable determination of the enamel curing, and at the same time, showing residual solvents or additives in the insulation....

Open the catalog to page 3
Wire Tester Catalog - 4

Tool for end users of wires The quality of wire is not visible, but it can be measured Even though present day enamelled wire is an excellent product, there might be good reasons for knowing the curing of the wire. The curing is essential for the production process and the quality of the final product. It is a benefit for the manufacturers and the users of wire that the quality/curing of the enamelled wire being used in the production is stable at each delivery or when supplied from different manufacturers A few minutes test delivers all the information needed for incoming inspection: ...

Open the catalog to page 4
Wire Tester Catalog - 5

-TD5 Tangent Delta Tester - DSE TEST SOLUTIONS TD5 - excellently high repeatability and accuracy ^TD5 - All the best in one unit • High temperature oven • High consistent of the measurements • High accuracy • Low maintenance needs • Round and Flat wire can be tested in one system • High speed • Approve/reject function • Reference wire in display • DIN or Logarithmic scales • Up to 99 pre-settings • Multi user language • IEC 60851-5 compliant TD5 Tangent Delta Tester TD5 is applicable for quality control of enamelled wire. During heat-up of the wire, the TD5 automatically calculates the...

Open the catalog to page 5
Wire Tester Catalog - 6

TD5 Software Features Easy operation and helpful features TD5 is user-friendly and easy to operate. During the measurement the curve is visible and combined with a reference wire the operator has the best possible overview. TD5 Tangent Delta Tester Reference curves Software option B This software tool evaluates the PEI base coat on self-bond wires (XWE types). A mathematical evaluation of the PEI curve lies beneath the selfbond signal and the Tangent Delta curve. This function eliminates the need for stripping self-bonding overcoat of the wire. Data input For fast and precise data input,...

Open the catalog to page 6
Wire Tester Catalog - 7

TD5 Features Multi-language The control software is currently available in English, German, Chinese and Russian, contact DSE Test Solutions for updated information. Sample holder The sample holder simplifies sample preparation, and is designed for absolute minimum need of maintenance. The standard sample holder can be used for both round and flat wire. TD5 Tangent Delta Tester Standard sample holder Handle both round & flat wire Calculation and presentation TD5 starts to measure and calculate the TgD temperature automatically when the sample holder is loaded into the oven. During the...

Open the catalog to page 7
Wire Tester Catalog - 8

TD5 Specifications TD5 Tangent Delta Tester Technical specifications TD5 measuring unit includes Oven with high-precision temperature controlling unit, power supplies, precision analyser, interface for PC via USB. Specifications: • Temperature range 45o - 400oC Resolution ±0.1oC • Readout ±0.1oC • Dimensions (DxWxH): 440 x 530 x 360 mm • Ambient temperature: 10°C - 35°C • Net weight 33 kg Implementation Standard: IEC 60851-5 Precision analyser • Tangent Delta resolution: 0.0005 at C > 100 pF • Measuring frequency 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz • Measuring voltage 1 Volt RMS PC •...

Open the catalog to page 8
Wire Tester Catalog - 9

TD3 Tangent Delta Tester DSEH TEST SOLUTIONS TD3 High repeatability - Low maintenance TD3 - Cost efficient TgD tester • High repeatability of the measurements • Compare results with multiple curves • Round and Flat wire in one system • Multi language user interface • Reference wire in display • Approve/reject function • Up to 99 pre-settings • Compact and low weight • Portable • IEC 60851-5 compliant TD3 Tangent Delta Tester TD3 is applicable for quality control of enamelled wire. During heat-up of the wire, the TD3 automatically calculates the TgD temperature (Tangent Delta temperature)....

Open the catalog to page 9
Wire Tester Catalog - 10

TD3 Features Sample holders The design of the sample holders for TD3 ensures easy applying of graphite combined with low need for maintenance. Standard wire TD3 Tangent Delta Tester Heavy wire Easy access for applying graphite The zone for applying graphite is shown directly on the sample holder. Innovative design of the contact blocks make the inserting of the wire very easy and ensures a reliable contact to the wire. Software description Fast measurements TD3 is designed for quick heat-up, a full Tangent Delta curve is produced in few minutes, depending on enamel type and wire dimensions....

Open the catalog to page 10
Wire Tester Catalog - 11

DSEB TEST SOLUTIONS Reference curve can be selected and up to 3 reference curves can be attached to each Set up. A reference curve is visible during the complete measurement. Approve/reject function Limits for approval or rejection of a measurement can be set in order to avoid mistakes. Optional also for the 2. tangent. Set up menu Up to 99 customised pre-sets can be stored, and easily found in the drop down box at any time. Software option B This software tool evaluates the PEI base coat on self-bond wires (XWE types). A mathematical evaluation of the PEI curve lies beneath the self-bond...

Open the catalog to page 11

All DSE Test Solutions A/S catalogs and technical brochures

  1. Test Fixture

    2 Pages

  2. DSE4111

    4 Pages

  3. DSE4200

    4 Pages

  4. DSE 4101

    4 Pages

  5. DSE4130

    4 Pages