- Catalogs
- DSC PUMPS SRL
- General Dosage Catalog
General Dosage Catalog
General Dosage Catalog
The document outlines the specifications for solenoid-driven dosing pumps, including models M60, M70, and M80. These pumps are designed for constant or proportional dosing in aggressive environments, featuring reinforced PP housing, a power supply of 100-240Vac at 50/60Hz, and an IP65 protection degree. They can be wall-mounted using the included bracket.
The pumps offer adjustable flow rates from 0-100% or 0-20%, with modes proportional to a 4-20mA signal or a pulse-emitting water meter. They support three performance setups and include features like assisted calibration, pH or Redox measurement, and selectable dosage modes (Acid/Alkaline or Reductive/Oxidant).
The pumps comply with EMC Directive 2004/108/CE, Low Voltage Directive 2006/95/CE, and RoHS and WEEE Directives 2011/65/UE and 2012/19/UE.
Installation kits are available for different models, with single packaging dimensions of 192x160x250 mm and a weight of 2.86 kg, and multipack dimensions of 405x270x515 mm and a weight of 18.16 kg.
Performance graphs illustrate the relationship between pressure (BAR) and flow rate (LT/H) for each model, based on tests with water at room temperature, with potential variations of 10%.
The document describes solenoid-driven dosing pumps, specifically the HC 151+ and HC 899 models, designed for precise chemical dosing with various technical features for enhanced performance and reliability.
- Pump head: PVDF
- Pump housing: PP or PBT
- Diaphragm: PTFE
- Balls: Ceramic or Pyrex
- Body valve: 1/2" - PVDF or PP
- O-rings: FPM or Viton®
- Injection ball valve: Hastelloy-Pyrex
- Injection fitting: PVDF or PP
- Foot valve: PVDF or PP
- Power supply: 100 ÷ 240 Vac 50/60Hz
The pumps offer various flow rates and pressures, with models M60, M70, and M80 providing different performance levels. The flow rate ranges from 1 to 15.5 liters per hour, and pressure ranges from 5 to 20 BAR, depending on the model.
Installation kits are available for different models, ensuring proper setup and operation. The kits include necessary components for installation and are priced separately.
The pumps feature digital control for chlorine measurement, selectable dosing modes (constant or proportional), and various operational settings such as ON-OFF or PWM modes. They also include safety features like overdose alarms and programmable timers.
Performance graphs illustrate the relationship between pressure and flow rate for different models, providing a visual guide to expected performance under various conditions.
The pumps are designed for high resistance to aggressive environments and high temperatures. They include features like manual air bleed valves, wall or foot mounting options, and digital interfaces for easy operation and monitoring.
1. Model HC999: Offers constant and proportional dosing, daily or weekly timer modes, and alarms for level and flux. It includes relay settings and data statistics.
2. Model HC200+: Features a digital multifunction design with constant or proportional dosing, selectable language and units, and a graphic display. It supports inputs from level probes and proximity sensors.
3. Special Models: Available upon request, these models offer constant flow with adjustable pulse frequency and standard 230Vac power supply.
The pumps comply with EMC, Low Voltage, RoHS, and WEEE directives. Performance graphs illustrate flow rate versus pressure for models M60 and M70, indicating variations in performance based on environmental conditions.
Installation kits are available for different models, and the pumps come with wall mounting brackets. Packaging options include single and multipack configurations.
Optional features include automatic bleeding versions and EPDM gaskets. The document also highlights the availability of special models with unique configurations upon request.
This document provides technical specifications and descriptions for various solenoid metering pumps and digital controllers designed for water treatment applications. The products are manufactured in Italy and adhere to several European directives, including EMC, Low Voltage, RoHS, and WEEE.
The solenoid metering pump features a constant flow rate with adjustable pulse frequency. Key components include an On-Off switch, a manual priming valve, and LED indicators for operational status. The pump body is made of polypropylene (PP), with Pyrex® spheres and Viton® or Dutral O-rings. It operates on a standard power supply of 230Vac – 50/60Hz, with other options available upon request.
The document describes several digital controllers for DIN rail and panel mounting, designed for measuring and regulating parameters such as pH, Redox potential, free chlorine, and conductivity. These controllers feature backlit LCD displays, multiple setpoints, and proportional outputs. They support various sensor inputs, including PT100 temperature probes, and offer password-protected programming.
- ADIN 20 START: A digital controller for DIN rail mounting, capable of measuring pH, Redox potential, free chlorine, and conductivity. It includes features like self-calibration of probes and alarm statistics.
- AR 10 START: A panel-mounted digital controller with similar functionalities to the ADIN 20 START, designed for easy user interface and flexible programming.
The products are available in single and multipack options, with dimensions and weights specified for each. They comply with RoHS and CE standards, ensuring safety and environmental compliance.
The document highlights Aqua Spa's commitment to providing flexible and dynamic solutions for water treatment, with a focus on user-friendly interfaces and robust material selection to suit various work environments.
The document describes multi-parametric measuring units designed for the control and regulation of chemical-physical water parameters such as pH, Redox (ORP), free Chlorine/Total Chlorine, and Conductivity. These units feature a standard power supply of 90-260Vac, an IP55 protection grade casing, and a 128x64 pixel backlight graphic display. Users can choose between Basic or Expert programming modes, and the units support independent setpoints in ON-OFF or Proportional mode.
The document lists several models, including single parameter controllers (AE START1+ for pH, Redox, Chlorine, and Conductivity) and multi-parameter controllers (AE START2+ and AE START3+ for combinations of pH, Redox, Chlorine, and Conductivity). Each model supports specific measurement ranges and functionalities.
Key features include hysteresis adjustment, selectable functioning modes (Acid/Alkaline, Oxidant/Reductive, Direct/Inverse), inputs for level probes, proximity sensors, and temperature probes (PT100), and 4-20mA proportional outputs. The units also offer assisted calibration of probes, quality verification of pH and Redox probes, and optional remote access via Ethernet or Wi-Fi.
Aqua spa provides preassembled panels for easy installation and control of water parameters. These panels are designed to meet market needs and include installation kits to facilitate setup. The document also mentions optional accessories like LAN cables and Wi-Fi modules.
The products comply with several directives, including the EMC directive (2004/108/CE), the Low Voltage Directive (2006/95/CE), and RoHS and WEEE directives (2011/65/UE, 2012/19/UE).
The control systems are suitable for various applications, including public and private pools, where they regulate pH and Chlorine levels. The document provides details on specific models like the A-J START+ and A-POOL TOP+, which include components like pumps, filters, and probes for comprehensive water parameter management.
The document provides detailed information on AQUA's dosing systems and accessories, designed for professional use in chemical dosing stations. It includes specifications for tanks, safety tanks, supports, mixers, and suction lances, with options for pre-assembled and tested skids.
- Tanks and Accessories: Cylindrical vertical containers made from non-toxic UV-stabilized polyethylene, available in various sizes (50 to 1000 liters). They feature a self-supporting structure, flat bottom, and threaded cover.
- Safety Tanks: Designed for secure containment, these are also made from UV-stabilized polyethylene and can be placed on flat surfaces without special precautions.
- Mixers: Available in fast and slow speeds, with single-phase and three-phase options. Made from PVC or AISI, they operate at 1400 rpm for fast mixers and 70 rpm for slow mixers.
- Suction Lances: Equipped with a low-level probe, adjustable length, and built-in check valve. Suitable for tanks with small openings and capable of a flow rate up to 100 l/h.
- Assembly: Pre-assembled dosing skids include a chemical tank, dosing pump, support, suction lance, and mixer. Specific configurations must be specified during the order.
- Installation: Supports and brackets are available for mounting dosing pumps and mixers, ensuring secure and efficient setup.
- Materials: Tanks and accessories are constructed from durable materials like polyethylene and PVC, ensuring longevity and resistance to atmospheric agents.
- Customization: Options for different connectors and probes are available, allowing for tailored solutions based on specific needs.
- Ensure proper specification of components during the ordering process to meet specific operational requirements.
- Consider environmental factors and chemical compatibility when selecting materials and configurations.
Catalog excerpts
CATALOGO GENERALE POMPE DOSATRICI MECCANICHE ELETTRONICHE E PNEUMATICHE
Open the catalog to page 1
- Pompe dosatrici a membrana meccanica - Pompe dosatrici a pistone tuffante - Pompe dosatrici a pistone tuffante - Applicazioni Speciali
Open the catalog to page 2
DSCPUMPS WWW.DSCPUMPS.IT POMPE DOSATRICI A MEMBRANA MECCANICA Le pompe dosatrici a membrana meccanica con meccanismo a ritorno a molla con albero eccentrico e disco di spinta, associano le caratteristiche funzionali delle pompe a pistone e i vantaggi delle pompe a membrana. Grazie alla qualità e alla semplicità della membrana queste pompe sono di facile gestione. •Pompa dosatrice a membrana è compatta ed economica. •La membrana meccanica svolge il ruolo di trasmissione della cilindrata, agendo in pratica come un pistone, ed in più separa il manovellismo a bagno d’olio dal fluido da pompare. •Manutenzione...
Open the catalog to page 3
Flow rate: 0-1000 l/h Pressure: up to 8 bar Accuracy: ± 2% of rated flow from 10 to 100% of rated flow Mechanically actuated PTFE diaphragm Safe: leak free operation, no external moving parts Robust, compact, reliable design Easy handling with minimum maintenance 0-100% Stroke adjustment while running or steady Standard micrometric manual adjustment 1 mm per turn Optional electric actuator, 4-20 mA or 0-10 V command with manual override Optional motor with integrated inverter for frequency control Silver painted aluminum casing Standard liquid end executions: S.S. 316 L, PP, PVDF Customized executions...
Open the catalog to page 4
Pompa dosatrice a membrane meccanica con meccanismo di Mechanical diaphragm metering pump with spring return ritorno a molla mechanism • Corpo pompa in Tecnopolimero Anticorrosione • Testata compatibile con qualsiasi prodotto chimico • Meccanismo di riduzione delta velocita costante del motore • Eccentrico ad alta tecnologia e precisione • Regolazione della portata tramite nonio lineare su scala 0-100% della portata • Efficienza energetica ad aKi livelli • Motore elettrico Standard c.v.e da 0.18 kw gr. 63 B14 trifase 230-400V. 4 poli 50 Hz IP 55 • Pump body in in anticorrosion technopolymer •...
Open the catalog to page 5
TRATTAMENTI DELLE ACQUE SCARICHI INDUSTRIAL! PRODOTTI CHIMICI ACIDI E AGGRESSIVI Testata PVDF Testata PP INDUSTRIA ALIMENTARE INDUSTRIE CHIMICHE PRODOTTI CHIMICI ALCALINI Testata AISI316L Testata AISI 316L Regolazione manuale R egolazione Automatica TRATTAMENTI IN AUTOMAZIONE TRATTAMENTI DEGLI SCARICHI Regolazione Automatica Regolazione manuale
Open the catalog to page 6
DSCPUMPS WWW.DSCPUMPS.IT POMPE DOSATRICI A PISTONE TUFFANTE Le pompe dosatrici a pistone tuffante con meccanismo a ritorno a molla con albero eccentrico e disco di spinta, associano le caratteristiche funzionali del dosaggio più accurato e performante. Grazie alla qualità e alla semplicità della costruzione queste pompe sono di facile gestione. •Pompa dosatrice a pistone tuffante è compatta ed economica. •Il pistone svolge il ruolo di trasmissione della cilindrata, agendo in pratica come una siringa, ed in più avendo una corsa lunga, la regolazione del dosaggio è molto più accurato. •Manutenzione...
Open the catalog to page 7
Accuracy: ± 2% of rated flow f'om 10 to 100% of ratec flow Low *low rate, high pressures Robust, compact reliable des'gn Accurate dosing at any pressure 0-100% Stroke adjustment while running or steady Standarc micrometric manual adjustment 1 mm per turn Optiona electr c actuator, 4-20 rrA or 0-10 V command with manual override Optiona motor with integrated inverter for f'eque-cy control Silve' pamtec a uminum casing Standard liquid erd executors: S.S. 316 L, PVC Custonrizec executions available: Incoloy S25, Hastelloy C27S, Titanium, etc... ATEX executions Double valve assemblies UNI/ANSI 'langes...
Open the catalog to page 8
PRESTAZIONI / PERFORMANCE
Open the catalog to page 9
DSCPUMPS WWW.DSCPUMPS.IT
Open the catalog to page 10
DSCPUMPS WWW.DSCPUMPS.IT POMPE DOSATRICI A PISTONE TUFFANTE CON TENUTA PERMANENTE Le pompe dosatrici a pistone tuffante con tenute sul pistone con nuova tecnologia che richiedono molta meno manutenzione della pompa dosatrice a pistone standard. Il meccanismo a ritorno a molla con alberoeccentrico e disco di spinta, associano le caratteristiche funzionali del dosaggio piùaccurato e performante. Grazie alla qualità e alla semplicità della costruzione queste pompe sono di facile gestione. •Pompa dosatrice a pistone tuffante è compatta ed economica. •Il pistone svolge il ruolo di trasmissione della...
Open the catalog to page 11
FUL series plunger sumps equipped with ■ I- S technology: "FREE PERMANENT * guarantees zero leakage, while performances are constant also at higher pressure. Flow rate: 0-1003 l/h Pressure: up to 100 bar Accuracy: + Z% of rated flow from 10 to 100% of rated flow Zero leakage plunger pump Robust, compact reliabe design Easy handling with minimum maintenance 0-100% Stroke adjustment wh le running or steady Standard micrometric manual adjustment 1 mm per turn Optional electric actuator, 4-20 mA or 0-10 V command w th marual override Optional motor with integrated inverter for frequency control Silver...
Open the catalog to page 12
PRESTAZIONI / PERFORMANCE
Open the catalog to page 13
. Serbatoi . Pompe . Agitatori .Tubazioni in aspirazione .Tubazioni in mandata Pompa dosatrice a membrana meccanica con albero allungato per fissaggio di uno stelo agitatore, al fine di utilizzare un motore elettrico per pompare ed agitare il prodotto necessario . industria del vino (farina fossile) . industria alimentare . industria chimica . industria farmaceutica . trattamento delle acque
Open the catalog to page 14
Polmone smorzatore di pulsazioni Utile ad attenuare i colpi d'ariete della pompa dosatrice Valvola di contropressione Utile ad evitare lo svuotamento della tubazione Taratura 1,5 bar Valvola di sicurezza Utile ad evitare che la linea in mandata raggiunga pressioni elevate che possono danneggiare I'impianto Taratura 2-200 bar Valvola di fondo completo di filtro Tubazione ed ogni altro accessorio utile alia creazione di un sistema di dosaggio
Open the catalog to page 15
CATALOGO POMPE PNEUMATICHE
Open the catalog to page 16
DSCPUMPS WWW.DSCPUMPS.IT Le pompe pneumatiche a doppia membrana sono da tempo riconosciute come le pompe La gamma di applicazioni è praticamente illimitata. Le pompe vengono realizzate in varie tagli e, con una vasta gamma di scelta dei materiali di costruzion e. Quasi ogni tipo di liquido, da altamente acido e corrosivo, passando per vernici, colle ad Applicazioni Le pompe pneumatiche possono essere utilizzate nelle più svariate installazioni e innumerevoli applicazioni. VERNIC I CARTARIO CERAMIC O CHIMICO
Open the catalog to page 17All DSC PUMPS SRL catalogs and technical brochures
Filtration Catalog87 Pages
WATER FOUNTAIN41 Pages
TANK29 Pages
solenoid driven dosing pumps2 Pages
- Pump with electric motor
- Stationary pump
- Self-priming pump
- Chemical pump
- Pump for the chemical industry
- Diaphragm pump
- Filter cartridge
- Industrial filter cartridge
- Fine filter cartridge
- Filtration unit
- Anti-corrosion pump
- Water filter cartridge
- Plastic filter cartridge
- VOC-free liquid filtration unit
- Polypropylene filter cartridge
- Pump with electronic control
- Adjustable-flow pump
- Water filtration unit