Product Information 02/ 2 0 0 4 Flexible connectors • Solderless terminals • Contact systems Silicone insulated copper cables and high current connectors. Highly flexible, free of halogen and flame retardant incl. suitable cable lugs and crimping tools.

Single insulated silicone copper cables 1,8/3 kV highly flexible, free of halogen and flame retardant Highly flexible, heat resistant cables with stabilized insulation thickness and a good UV and ozone stability. Excellently suitable for high current connections inside switch gears, switch boards or other electro technical installations. Because the electro technical industry develop switch gears with great power but smaller and smaller dimensions, extremely flexible high current connectors are needed. Our silicone insulated copper cables offer a excellent possibility for high current connections...

Double insulated copper cables 1,8/3 kV or 3,6/6 kV highly flexible, free of halogen and flame retardant Double insulated highly flexible silicone insulated cables for greater demands on mechanical and electrical stress. The silicone compound and the copper conductors are the same like our single insulated cables. So we are able to offer also double insulated cables with excellent technical characteristics in a extremely flexible design. The outside diameter of the stripped cables are manufactured in coordination with cable lugs acc. to DIN 46234/DIN 46341 and druseidt cable lugs for fine stranded...

Highly flexible ready assembled copper connectors 50 - 300 mm2 solderless pressed design, extremely movable These extremely flexible connectors are manufactured by one or several single insulated silicone cables in extruded design acc. to the page 2 of these product information. The contact areas are assembled with solderless pressed copper connectors. The connectors with their high flexibility are suitable for connections which have to do movements as well as to transfer high current by using components with smaller dimensions. So they are excellent suitable for connecting components inside...

Flexible connectors with cable lugs or plugs and sockets 4-150 mm2 respectively 10-120 mm2 design A with tubular cable lugs Highly flexible connectors manufactured by single insulated extruded silicone cables acc. to page 2 of these product information. Design A with tubular cable lugs. Design B with cable lugs acc. to DIN 46234. The values about the current load are in accordance with VDE 0298 Part 4 table 15. design B with cable lugs acc. to DIN 46234 Technical Datas dimensions mm current load design A with plug Highly flexible connectors with plugs and sockets manufactured by single insulated...

Cable lugs and crimping tools for working with silicone insulated druseidt-cables Tubular cable lugs 10f-150f for fine stranded cables Material: E-Copper-tube DIN 40500, surface tinned When working with our highly flexible silicone cables even under high current or voltage it is necessary to guarantee optimized electrical connections. So it is necessary to work only with suitable cable lugs and suitable crimping tools to guarantee a absolute save and correct crimping. To guarantee this facts we offer additionally to our cables suitable cable lugs as well as suitable crimping tools with special...

Cable lugs and crimping tools for working with druseidt silicone insulated cables Tubular cable lugs 35f – 150f mm2 with smaller flange for fine stranded cables Material: E-Copper-tube DIN 40500, surface tinned By working with our tubular cable lugs with smaller flange it is in combination with our silicone insulated cables possible to produce highly flexible and extremely movable electrical connections with smallest dimensions. The electro technical industry develop switch gears or switch boards with smaller and smaller dimensions by the same or more power as the model before. So our silicone...

Crimping tools with exchangeable die sets for tubular druseidt cable lugs for fine stranded cables Hydraulic operated crimping tools Small handy, hydraulic operated crimping tools with limit compression valve. Part-No. 12930 with single acting piston pump. Part-No. 12933 with double acting piston pump for rapid motion of the die set. The collapsible 180° pivoting head of the tool enables a quick changing of the die sets. The handy design, the little weight and the construction of the crimping head offer also a working inside difficult equipment or small places. Technical Datas You find the necessary...

Battery operated crimping and cutting tool Battery operated crimping and cutting tool with extremely high compacting pressure (up to 100 kN). The collapsible, turnable head combined with the little weight (ca. 4 kg) enables also a working in small places. The high speed battery charger with a loading time of only ca. 15 minutes is standard and makes it possible to work continuously without break only with one additional spare battery. The stabilized exchangeable cutting head enables quick and easy cutting of copper- and aluminium cables up to an outer-Ø of 54 mm. So it is possible to cut cables...

Karl-Kahlhöfer Straße Neuenkamper Lenneper Straße Direction Leverkusen, Köln and via A 3 direction Frankfurt/Oberhausen BABHighwayconnection Remscheid Direction Lennep traße Nords TOWN CENTER Direction Wuppertal-Ronsdorf Direction Dortmund, and via A 46 direction Wuppertal/Düsseldorf and via A 43 direction Bochum/Münster Direction Solingen Direction Wermelskirchen Paul Druseidt Elektrotechnische Spezialfabrik GmbH & Co. KG Postfach 10 02 25 42802 Remscheid Germany Tor I: Neuenkamper Straße 105 Tor II: Lenneper Straße 131 Tor III: Karl-Kahlhöfer-Straße 9 42855 Remscheid Germany Telefon: Telefax:...