Flexible power- and grounding connectors with welded contact areas “Made in Germany”
12Pages

Flexible connectors • Solderless terminals • Contact-systems Flexible power- and grounding connectors with welded contact areas “Made in Germa

Flexible power- and grounding connectors with welded contact areas E-Mail: info@druseidt.de The measurements and technical information written in this catalogue have been determined with greatest care and are updated continuously in our documentation. The illustrations correspond to the status at the time of printing. We reserve us The use of photos, drawings or other parts of this catalogue for own advertisement or other usage is subject to our formerly written acceptance. the right to make technical as well as changes of measurements, colours or formats after printing. Our information,...

Druseidt Elektrotechnik Flexible current connectors and earthing tapes with welded contact areas Flexible current connectors and earthing tapes made by druseidt electrotechnology are excellently suitable for the most diverse applications in the field of switchgear, switchbox and electrical control engineering. The welding process, used for the production process, allows a massive welding of contact areas, resulting in extremely flexible components with optimized electrical resistances and reduced power losses. Also the welding of multilayer braids or braids with narrow connection areas,...

Flexible power- and grounding connectors with welded contact areas This copper braids are manufactured as flat rolled tubes. Caused by our special rolling process lower tolerances than with the conventionally used process can be achieved. This results in a relatively dimensionally stable design with pronounced edges. Such braids are better suited for automated processing than standard braids, e. g. for connectors in welded design. They therefore serve as base material for our below described flexible connectors with welded contact areas. Material: Soft annealed Cu-ETP1 wires acc. to DIN EN...

Druseidt Elektrotechnik Technical data • Copper braids out of Cu-ETP 1 wires acc. to DIN EN 13602 • Soft annealed, uncoated • Single-wire-0 0,16 mm (10 mm2) Single-wire-0 0,20 mm (16-140 mm2) • Contact areas welded This grounding- and current connectors are technically innovative flexible electrical connection elements, which can be used for a variety of applications. The massively welded contact surfaces result in components with extremely low electrical resistance and good electrical aging behavior. When used as earthing tapes braids have a much lower impedance than round stranded cables...

Flexible power- and grounding connectors with welded contact areas Technical data Electrical conductor • Copper braid made out of wires Cu-ETP 1 acc. to DIN EN 13602 • Soft annealed, uncoated • Single wire-0 0,15 mm (10/16 mm2) Single wire-0 0,20 mm (25-210 mm2) PVC extruded braided copper tapes consist out of uncoated, soft annealed Cu-ETP 1 wires and are insulated by a black high quality vinyl compound. The compound is hardly inflammable/ self extinguishing and free of lead. The as inner conductor used braid is manufactured as a flat rolled tube. The technical characteristics of the...

Druseidt Elektrotechnik Technical data Electrical conductor • Copper braid made out of wires Cu-ETP 1 acc. to DIN EN 13602 • Soft annealed, uncoated • Single wire-0 0,15 mm (10/16 mm2) Single wire-0 0,20 mm (25-210 mm2) This types of current- and grounding connectors consist out of PVC-extruded flat braids whose connection surfaces are welded solid. The result is a flexible connection with extremely low electrical resistance and good electrical aging behavior. The isolation is extruded, so that, in contrast to subsequently deferred hoses, it fits tightly against the braid. This is an...

Flexible power- and grounding connectors with welded contact areas Highly flexible heat- and cold resistant insulated flat braids. Technical data The electrical conductors consist out of soft annealed Cu-ETP 1 wires which are extruded by a high quality halogen-free silicone compound. The used silicone material is extremely flexible and enables, above all in conjunction with our welded connection surfaces, the production of extremely flexible and universally applicable electrical connections. They are well suited within switchgear and plant construction as well as for applications where a...

Druseidt Elektrotechnik This highly flexible connectors consist out of silicone extruded braids whose connection surfaces are welded solid. The result is an extremely flexible electrical connection, characterized by both cold- and heat resistant insulation (- 50 °C up to + 180 °C). Ideally suited for electrical connections in applications where only a small amount of space is available or the connection needs to move. Technical data Electrical conductor • Copper braid out of Cu-ETP 1 wires acc. to DIN EN 13602 • Soft annealed, uncoated • Single wire-0 0,16 mm (10 mm2) Single wire-0 0,20 mm...

Flexible power- and grounding connectors with welded contact areas Flexible current connectors with, in relation to the cross-section, narrowly shaped design and solid welded contact areas. Therefore ideally suited for the connection of compact switches with narrow current outputs to busbar systems. The width of the connection surfaces are so designed that also supple bars can be replaced. Caused by the massively welded contact surfaces components with extremely low electrical resistance and excellent electrical aging behavior arise. As standard insulation subsequently mounted silicone- or...

Druseidt Elektrotechnik These multi-layered flexible power strips with welded connection surfaces allow the transmission of currents up to 1000 A via compact and relatively narrow connection surfaces. They are therefore well suited for installation in confined spaces or to carry out movements with simultaneous flow of current. Technical data Electrical conductor • Copper braid out of Cu-ETP 1 wires acc. to DIN EN 13602 • Soft annealed, uncoated The welding process used by us allows a compact and massive welding of both 2-layer and 3-layer power strips with a maximum total cross-section of...