The new UNIK 5000 is a high performance configurable solution to pressure measurement. The use of micromachined silicon technology and analogue circuitry enables best in class performance for stability, low power and frequency response. The new platform enables you to easily build up your own sensor to match your own precise needs. This high performance, configurable solution to pressure measurement employs modular design and lean manufacturing techniques. The combination of a high technology sensor, together with advanced signal conditioning and packaging techniques, provides an ideal long term solution for reliable, accurate and economical measurements. Custom-built from standard components, manufacturing sensors to your requirement is fast and simple; each UNIK 5000 is a "bespoke" pressure sensing solution, but with the short lead times and competitive pricing you would expect from standard products. We have the people and the knowledge to support your needs for accurate and reliable product performance; our team of experts can help you make the right sensor selection, guiding you and providing the help and tools you need. It is important to ensure that the sensor material and performance selected are suitable for your application. • Ranges from 70 mbar (1 psi) to 700 bar (10000 psi) • Accuracy to ±0.04% Full Scale (FS) Best Straight Line (BSL) • Stainless steel construction • High over pressure capability • Hazardous area certifications • mV, mA, voltage and configurable voltage outputs • Multiple electrical and pressure connector options • Operating temperature ranges from -55 to +125°C (-67 to +257°F) Online configuration tool

UNIK 5000 specificationsMeasurement Operating pressure ranges:Gauge ranges Any zero based range 70 mbar to 70 bar (1 to 1000 psi) Note: All psi values are approximate. Sealed gauge ranges Any zero based range 10 to 700 bar (145 to 10000 psi) Any zero based range 100 mbar to 700 bar (1.5 to 10000 psi) Uni-directional or bi-directional 70 mbar to 35 bar (1 to 500 psi) Wet/Wet Uni-directional or bi-directional 350 mbar to 35 bar (5 to 500 psi) Line pressure: 70 bar (1000 psi) maximum Barometric ranges are available with a minimum span of 350 mbar (5.1 psi) Non-zero based ranges Non-zero based ranges...

Long term stability ±0.05% FS typical (±0.1% FS maximum) per year increasing pro-rata for pressure ranges below 350 mbar Temperature effects Four compensated temperature ranges can be chosen. Industrial accuracy performance: • -40 to +125°C (-40 to +257°F): *TEB = Temperature Error Band Improved and premium accuracy performance: Temperature effects increase pro-rata for pressure ranges below 350 mbar (5 psi) and are doubled for barometric ranges. Line pressure effects (differential version only) Zero shift: <±0.03% span/bar of line pressure Span shift: <±0.03% span/bar of line pressure Effects...

Physical specifications Environmental protection • See Electrical connector section • Hyperbaric pressure: 20 bar (300 psi) maximum Operating temperature range See Electrical connector section Pressure media Fluids compatible with stainless steel 316L and Hastelloy C276 Do not use with media that has an oxygen concentration >21% or other strong oxidising agents. For the wet/dry differential version, negative pressure port: Fluids compatible with stainless steel 316L, stainless steel 304, Pyrex, silicon and structural adhesive. Enclosure materials Stainless steel (body), nitrile- or silicone-rubber...

Regulatory Compliance Information Approval Type Australia/New Zealand • EMC (RCM) - compliant • lECEx - Hazardous area (optional, refer to approvals) Note: RCM mark is placed on H0 and IECEx approved options H1, H2 and HA • Hazardous area (optional, refer to approvals) • CRN registered, OF18611.513467890YTN-Rev1 & OF18611.52 New design for Alberta, for operating pressures <= 350 bar (5076 psi) • Hazardous locations (optional, refer to approvals) • RoHS - compliant • Hazardous Area (optional, refer to approvals) • Hazardous area CU TR 012/2011 (optional, refer to approvals) • Kazakhstan metrology...

Electrical connector Connector type +ve Supply +ve Output -ve Output -ve Supply +ve Supply +ve Output -ve Output -ve Supply Shunt Cal Case +ve Supply +ve Output 0V Common 0V Common Shunt Cal Case +ve Supply +ve Output -ve Output -ve Supply Shunt Cal +ve Supply +ve Output -ve Output -ve Supply +ve Supply +ve Output -ve Output -ve Supply Shunt Cal +ve Supply +ve Output 0V Common 0V Common Shunt Cal +ve Supply +ve Output -ve Output -ve Supply Shunt Cal Raychem Cable Blue -ve Supply 0V Common +ve Supply +ve Output -ve Output -ve Supply +ve Supply +ve Output -ve Output -ve Supply Shunt Cal +ve Supply...

Ordering information (see the online configuration tool at Druck.com) (1) Select model number Main Product Variant PMP Amplified Pressure Transducer PDCR mV Pressure Transducer Product Series 5 UNIK 5000 Diameter and Material 0 25mm Stainless Steel Electrical Connector (Note 6) 0 No Electrical Connector (Note 7) 1 Cable Gland (Polyurethane Cable) 3 Polyurethane Cable (Depth) 4 Hytrel Cable (Depth) 6 MIL-C-26482 (6-pin Shell Size 10) (Mating connector not supplied) 7 DIN 43650 Form A Demountable (Mating connector supplied) A Demountable MIL-C-26482 (6-pin Shell Size 10) (Mating connector not supplied)...

Ordering notes • sealed gauge Note 1: Premium accuracy is not available on this version • wet/dry differential Note 2: Please ensure that the electrical connector selected is option 0, 2, 6, A, E, F or G. Note 3: Select one of these pressure connectors for pressure ranges over 70 bar Note 4: Maximum operating temperature is 80°C (176°F) Note 5: Hazardous area certifications not available Note 6: Hazardous area certifications are restricted by electrical connector options in line with the following table: Connector • wet/wet differential 4) State cable lengths and units Integer values only, e.g....