NG3000 Aerospace Pressure Sensor
6Pages

Next Generation 3000 seriesAerospace Pressure Sensors - millivolt The Next Generation 3000 series (NG3000) platform, provides a robust technical and cost effective solution. The product has been designed and qualified to satisfy the demands within both Commercial and Military Aviation, whilst also being suited to the developing markets within Advance Air Mobility (AAM) and Space launch vehicles. The products are an evolution of the field proven PTX/PMP3000 platform, which launched in the year 2000. Druck Aerospace has been supplying the industry for more than 30 years, with a large installed base on many of the world's prestigious programs. The lessons learned throughout this period, combined with the latest designs and processes, has enabled the technology improvements to be made to offer this fully configured COTS solution. The benefits of the COTS product helps reduce the need for expensive qualification testing and lengthy development cycles, whilst also supporting smaller program needs. The product range has been stringently tested and qualified in accordance with the most current RTCA DO-160G and Mil. standards for airborne equipment, with additional levels of testing beyond these requirements to ensure that our products will perform for the wider range of applications. The product variants are designed to fulfill a complete range of applications performing in the harshest of environments including but not limited to: • Engine • Hydraulic actuation • Environmental Control Systems (ECS) • Auxiliary Power Units (APU) • Fuel • Cooling/heating systems • Unmanned airborne vehicles • Test Technical Features of this product • Qualified to the latest airborne equipment requirements • Fully analogue (no micro processors) • Excellent accuracy and stability performance • Standard and extended temperature ranges available • Dual and single channel variants • Fully hermetically sealed • Low mass • Wide range of pressure and electrical interfaces • Pressure ranges from 350 mbar (5 psi) up to 700 bar (10150 psi) full-scale. • Gauge/sealed gauge, differential and absolute • High pressure overload protection

General specification • Selectable 5Vdc or 10Vdc power supply (sensor output is ratiometric to the supply voltage). • Zero offset available up to 10 mV for 10 V supply and 5 mV for 5 V supply. • Standard Operating Temperature Range -55°C to +150°C (-67°F to +302°F) for pressure ranges starting at 350 mbar (5 psi). • Extended Operating Temperature -55°C to 177°C (-67°F to 351°F) for pressure ranges starting at 700 mbar (10 psi). • Qualified to RTCA DO-160 G (qualification report available upon approved request). Accuracy Electrical interface via 4/5/6 pin connectors (single channel), 8/10/12...

* All dimensions are max. based on variable options The differential pressure sensor is semi-isolated by design. The High Pressure port is denoted as P1, and is fully isolated from the pressure media. The Low Pressure port is denoted as P2, with the pressure sensing silicon exposed to the media. See specification document for compatibility information. This product should only be used where the media is known and is proven to be compatible with the silicon and adhesive used on the low pressure port. Line pressure is the static pressure applied to both ports. Performance • Single channel...

Single Channel Abs./SG Single Channel Gauge Dual Channel Abs. Dual Channel Gauge High Pressure Abs./SG 53.5 mm * All dimensions are max based on variable options. Gauge is referenced to the atmospheric pressure. Sealed gauge is referenced to vacumm with the silicon not exposed to application media. Sensor is calibrated to gauge pressure. Absolute is referenced to zero atmospheric pressure. Performance • Single or dual channel offering • 350 mbar to 700 bar Absolute or Sealed Gauge (5 psi to 10150 psi). • 350 mbar to 70 bar PSI Gauge (5 to 1015 psi) • Minimum span and operating pressure for...

Pressure Type Code Description 1 Differential (Single Channel only) Output Type Calibration Certificate Code Description No Selection Digital P Paper Mating Connector Code Description No Selection No Mating Connector M Supplied /w Mating Connector Line Pressure (Diff Only) Code Description Temperature Range •- Code Description Pressure Units • - Code Description Pressure Connector Minimum Pressure Differential: -1 bar to 350 mbar Maximum Pressure • Standard Temp, Diff and Gauge: 0.35 to 70 bar Standard Temp, Abs: 0.35 to 700 bar Extended Temp, Diff and Gauge: 0.70 to 70 bar Extended Temp,...

Table 3 - Sensor Pressure Range Options Selectable between 0mV and 5 mV in 0.1 mV increment. Selectable between 0mV and 5 mV in 0.1 mV increment. Selectable between 10 V As above 0mV and 10 mV in x2 as above Minimum Order Quantity (MOQ) is five (5) pieces of any single configuration. Baker Hughes Copyright 2023 Baker Hughes Company. All rights reserved. 920-707A BHCS39402 (04/2023)