Portable automatic/hybrid pressure controller Genii advanced modular calibration system The PV624 within one portable base station is both a fully automatic controller and a hybrid pressure controller. Hybrid control combines the advantages of manual pressure generation with fully automatic pressure generation and control. Using the PV624 with a DPI620G electrical calibrator and interchangeable PM620/PM620LP/PM620T pressure modules from the Genii advanced modular calibration system creates a uniquely capable, flexible, self-contained portable automatic hybrid pressure controller with a turndown from high to ultralow pressure. The PV624 automatic/hybrid pressure controller offers an easy and fast method to accurately maintain pressure set points. Hybrid pressure control also supports large test volumes and long battery life. With a robust design and tool-less pressure connection, the PV624 is ideally suited to perform pressure testing and calibrations in the field.

• Rangeable pressure generation from 2.5 mbar (1 inH2O) • In-the-field pressure range selection from the Genii PM620/PM620LP/PM620T pressure module family. • In built barometer to enable accurate pseudo pressure measurements. • Smart selection of Low-pressure fully automatic pressure generation or high pressure/volume hybrid generation. • Automatic pressure control range +/-55 mbar (22 inH20) into a 20 mL (0.7 fl oz) volume • Hybrid pressure generation and control from -0.9 barg (-13 psig) to 20 barg (300 psig). • Fully automatic pressure generation and control to accurately maintain setpoint....

Precision engineering The choice of case material and precision over moulding ensures that the PV624 is rugged, weatherproof, and suitable for the harshest environments. Supplied with a dirt trap to reduce contamination of both the instrument itself and the system under test from dirt and debris as well as moisture. Ease of use The PV624 provides a tool-less quick-fit pressure connection where finger-tight connections achieve pressure-tight connections to 20 bar (300 psi). Supplied with a G1/8 female and 1/8 NPT female adapter (other adapters available, see accessories). The PV624 is supplied...

Speed to stable set point 0 barg to 20 barg (300 psig) +/-50 ppm into 50 ml volume <90sec Automatic pressure control range +/- 55 mbar (22 inH2O) into a 20 mL (0.7 fl oz) volume Hybrid pressure control range -0.9 barg (-13 psig) to 20 barg (300 psig) Compatible PM620, PM620LP & PM620T (FS) pressure ranges Differential ranges: +/- 2.5 mbar (1 inH2O), +/- 12.5 mbar (5 inH2O), +/-25 mbar (10 inH2O) Gauge ranges: 0.07 bar (1psi), 0.1 bar (1.45 psi), 0.2 bar (3 psi), 0.35 bar (5 psi), 0.7 bar (10 psi), 1 bar (15 psi), 2 bar (30 psi), 3.5 bar (50 psi), 7 barg (100psi), 10 barg (150 psi), 20 barg (300psi)....

Power supply Accessories for the PV624 15 V, 2 A (30 W) Battery life (from 100% charge) Min 8 hrs continuous usage (typical) Power failure protection System lock and manual vent valve feature provided USB client micro-USB (+Bluetooth® low energy for B1 option) Quick fit with G1/8 female + 1/8 NPT female adapter PV624 Hybrid pressure controller base station Connectivity to DPI620G B0 B0 Standard electrical connection B1 B1 Standard electrical connection plus *Bluetooth‘ PV624 - B0 (Example model number) • 1x PV624 Hybrid pressure controller base station • 1x Rechargeable battery pack • 1x Quick...

PM620LP Low pressure tube Flexible 6 mm (1/4") silicone tubing for use with the PMP620LP pressure module “push fit” barbed pressure connectors. P/N IOHOSE-LP2: 2 m/6.56 ft low pressure pneumatic twin tube. Maximum pressure 500 mbar/7 psi. Low pressure tube connector kit Low pressure connector kit compatible with 6 mm (1/4") flexible twin silicon tubing. Contains: 1 off high pressure barb to connect tube to PV62X/MC620G, 1 off valve to allow pressure equalization of high and low pressure tube during set up and sensor zero, 3 off "T" connectors. P/N IO620-LP: Low Pressure Connector Kit Pressure...