Catalogs >
Druck >
Druck PDCR 300 For harsh test applications

Druck PDCR 300 For harsh test applications
3Pages

Catalog excerpts

Druck PDCR 300 For harsh test applications - 1

For harsh test applications This product has been specifically designed and tested to meet the harsh requirements found within many Aerospace applications, whilst also satisfying many industrial requirements. The product is founded on the highly reliable silicon chip produced within Druck’s own 21st Century clean room. The Piezoresistive technology has been developed and enhanced for more than 45 years, which is widely used within the Aerospace/Industrial and Oil & Gas markets. This compact analogue sensor provides unrivalled performance across a wide Pressure and Temperature range, which lends itself very well for a variety of uses across high pressure requirements within hydraulic systems to low pressure, barometric measurement. No micro-processors are adopted within this product, which enables reliability at high temperatures to be achieved. The conditioned millivolt output is distributed through a 4-wire configuration. Target applications Aerospace Test and General Industrial • 24 AWG PTFE Insulated cable Pressure ranges Zero based ranges: • Lowest Full Scale Range 110 kPa (1.1 bar) • Total Accuracy ± 3% Full Scale (across wide temp. range -55˚C to +150˚C) • Highest Full Scale Range 35 MPa (350 bar) Mechanical properties Electrical properties • Power Supply: 2.5 to 15 Vdc (output ratiometric to supply) • Proof Pressure 1.5 x Full Scale • Input impedance: >2000 Ohms • Containment Pressure 2.0 x Full Scale • Output Impedance: 5000 Ohms (nominal) • Media compatibility: – anges <=2MPa or =7MPa: Fluid compatible with SS17-4PH R and SS316L – anges >2MPa to <7MPa: Fluid compatible with SS17-4PH, R SS316L and Inconel 625 • Insulation resistance >100 MOhms @ 500 Vdc See table 1 for complete offering. • Mounting Torque: 4 Nm maximum The effects of Non-linearity, Hysteresis and Repeatability. A ccuracy includes the combined effects of Non-Linearity, Hysteresis, Repeatability (NLH&R) and ze

Open the catalog to page 1

Druck PDCR 300 For harsh test applications - 2

Table 1. Pressure ranges Part number Pressure range Wiring details Laser marking details (example) Electrical connections Color Output Positive (Output +) Output Negative (Output -)

Open the catalog to page 2

Druck PDCR 300 For harsh test applications - 3

Notes: • or supply of this product outside of China, the TRS requirements will need to be considered on a case by case basis. F • Standard Lead-time is 8 weeks from order for popular ranges. • inimum Order Quantities any type (defined by pressure range) is 2 pieces. M • ther ranges may be available upon request – subject to review and approval. O Copyright 2021 Baker Hughes Company. All rights reserved. BHCS39123

Open the catalog to page 3

Druck PDCR 300 For harsh test applications 3Pages

Catalog excerpts

All Druck catalogs and technical brochures

Druck PDCR 300 For harsh test applications
3Pages