Druck DPI 611 Hand-held Pressure Calibrator
12Pages

DPI 611 hand-held pressure calibrator This fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power to provide all the convenience of the Druck DPI 610/615 and yet it’s half the size, twice as accurate and easier to use.

DPI 611 hand-held pressure calibrator The DPI 611 is the fourth generation in the DPI 600 family, which was first introduced in 1984. The DPI 600 family revolutionized test and calibration by providing all the tools for pressure generation and signal measurement in selfcontained portable packages. The DPI 600 soon became the industry workhorse and today it is simply known as the “Druck.” Building on the technical legacy and more than three decades of experience in pressure measurement and calibration, the DPI 611 provides all the convenience and reliability of a true “Druck,” yet offers...

Performance is a function of precision engineering

Pressure generation P2 IDOS is an optional external pressure sensor. With the DPI 611 you can generate from 95% vacuum to 20 bar/300 psi pneumatic pressure. A simple selector lets you convert from vacuum to pressure and with a few stokes of the pump, you will generate the required pressure. Fine adjustment is made with the built-in volume adjuster and falling calibration points are achieved with the precision vent valve. • The redesigned mechanical system provides significantly improved performance, allowing you to generate 20 bar/300 psi while holding the instrument in one hand. • It’s...

Quick-to-fit pressure connections Making a leak-tight pressure connection in the field is inevitably frustrating. The DPI 611 comes with a quick-tofit adapter system that has a number of advantages over conventional methods: • All adapters, hoses and accessories, including the dirt moisture trap, are quick and simple to fit. No tools or sealing are required and connections are leak free. • Damaged adapters are very simply replaced and there’s no repair downtime. • Making leak tight connections wastes time and for several joints, it takes longer than a calibration. The DPI 611 system is...

DPI 611 external features Quick-to-fit pressure adapter system (no tools required or seals) Electrical connections for measuring mA, mV, V and detecting switch contacts. Pressure vent valve (precision needle valve for fine control) 10V DC regulated supply and 24V loop power Hand strap attachment Protective cover Full color touch screen display USB master and slave sockets On/Off/Sleep Hand strap attachment Padded leather hand strap (attaches to left or right) Pressure/vacuum selection Volume adjuster for precise pressure setting Anti-slip feet (front and rear)

Fully documenting The DPI 611 is a simple-to-use “everyday” tool for maintaining and calibrating pressure instruments. It also has the advanced features of the DPI 620 Genii for automating calibration procedures, calculating errors and interfacing with PCs and calibration and maintenance systems. 4Sight2 calibration and maintenance software • Automated calibration procedures • PASS/FAIL error analysis • Multi-channel data logging • 8 GB (nominal) user memory • Connectivity with leading calibration and maintenance software including 4Sight2 from Druck Automated calibration procedures...

Advanced features Step and ramp mA output: Simply configured for simulating transmitter outputs into control loops, testing valve positioners and checking safety systems. The function has programmable end points, manual or automatic sequencing and the following options for quick set-up: Pressure leak test: This automated procedure for detecting leaks and determining leak rates has programmable settle and run times. The start and end pressures are reported along with the pressure change and leak rate. • % step: The step size is defined as a percentage. For example 25% provides five test...

Multiple parameter display capability Pressure (gauge ranges referenced to atmosphere) Pressure Range The display can be configured to show a maximum of three simultaneous reading windows as follows: pressure, electrical measurement or electrical source, IDOS external pressure module. General specifications English (default), Chinese, Dutch, French, German, Italian, Japanese, Korean, Portuguese, Russian, Spanish Operating temperature -10° to 50°C (14° to 122°F). 0° to 40°C (32° to 104°F) when powered from optional mains adaptor IO620-PSU Storage temperature Ingress protection IP 54....

Accessories DPI 611 carry case (P/N IO611-CASE-1) A tailored carry case made from durable leather allows the DPI 611 to be used without removing it from the case. Detachable shoulder strap and storage pocket for test leads. Pressure adapter set A set of test point adaptors to connect the tool-less quick fit DPI 611 pressure port or the extension hoses to the device under test P/N IO620-BSP: G1/8 male and G1/4 male, G1/4 female, G3/8 female and G1/2 female P/N IO620-NPT: 1/8” male and 1/4”male, 1/4” female, 3/8” female, and 1/2” female P/N IO620-MET: 14 mm female and 20 mm female Mains...

Copyright 2021 Baker Hughes Company. All rights reserved.