Catalogs >
Druck >
Druck 4300 Motorsport

Druck 4300 Motorsport
6Pages

Catalog excerpts

Druck Motorsport/ Automotive Pressure Transducers Success in motorsport depends on hundreds of components working together under extreme conditions, and Baker Hughes continues to develop Druck pressure transducers that give the ultimate performance. Druck motorsport sensors have become a world-leading product line used in Formula 1, World Rally Championship and the Indy Racing League, amongst others. The PDCR/PMP 4300 Series is the latest in the range of products that for many years has been “fine tuned” in design to suit all chassis and engine pressure measurement requirements. Race proven technology High temperature capability to 350°F (175°C) Amplified or millivolt output Stainless steel or titanium construction

Open the catalog to page 1

Race Proven Technology Since 1990 Druck products have been successfully applied to motorsport, and the PDCR/PMP 4300 Series is a high performance pressure sensor for this harsh environment application. High Performance Baker Hughes has a new advanced and comprehensive silicon processing facility and is one of a few companies turning raw silicon into finished pressure sensing products. Each pressure module is fully temperature cycled to enhance long-term measurement stability. All metalwork is welded to form a rugged housing. Upon completion of the electrical connections the units are again...

Open the catalog to page 2

Wiring Details P***431* Cable Core Colour Red Temp (optional) Temp (optional) Temp (optional) Temp (optional) or case

Open the catalog to page 3

Specifications Pressure Measurement Pressure Ranges 1.6, 3 bar absolute (25, 45 psi absolute) 10, 15, 30, 80, 125, 250 bar absolute or sealed gauge (145, 217, 435, 1160, 1810, 3625 psi absolute or sealed gauge) Note 1: All ranges are 0 based. Note 2: Sealed Gauge ranges are available on PMP (Amplified) options only. Overpressure Stainless steel: 2 x rated pressure or 375 bar (5440 psi) maximum Titanium: 2 x rated pressure Pressure Containment Stainless steel: 375 bar (5440 psi) maximum Titanium: 500 bar (7250 psi) maximum Media Compatibility Fluids compatible with stainless steel 316L or...

Open the catalog to page 4

AS micro stainless steel: <30 g (1 oz) Cable and stainless steel: 57 g (<2 oz) Cable versions quoted with 1 m (40 in.) of cable. 50 to 2500 Hz @ 40g, 8 hours per axis, logarithmic sweep at a rate of 0.32 octaves/minute with no effect on calibration Installation Torque 1000 g, 1 mS half sine pulse in all three axes with no effect on calibration 10 Nm will produce negligible zero offset EMC CE mark statement “CE marked for electromagnetic compatibility” Ordering Information Calibration Standards Mating electrical connector (supplied loose) Transducers manufactured by Baker Hughes are...

Open the catalog to page 5

2) State the pressure range and units Pressure ranges are all zero based and can be any value from 1.6 bar to 250 bar. Unit options are: • 3) State the pressure reference Reference options are: • Sealed gauge (Only for PMP versions of 10 bar range or above) Default cable length is 1 m (3 ft) Longer cables can be requested upto a maximum of 10 m (33 ft) 4) State cable length and units Druck.com Copyright 2020. Baker Hughes Company. This material contains one or more registered trademark of Baker Hughes Company and its subsidiaries in one or more countries. All third-party product and company...

Open the catalog to page 6

Druck 4300 Motorsport 6Pages

Catalog excerpts

All Druck catalogs and technical brochures

Druck 4300 Motorsport
6Pages