DPI 705E
8Pages

Druck Handheld Pressure Indicators The Druck DPI 705E Series of handheld pressure and optional temperature indicators combine tough and rugged design with accurate and reliable measurements. Compact and robust, the DPI 705E Series is designed for single handed operation and provides many essential features required for routine maintenance and system troubleshooting. 48 pressure ranges from ±25 mbar to 1,400 bar (±1.69 psi to 20,000 psi / 2.5 KPa to 140 MPa) Total 1 year uncertainty down to 0.05% full scale (FS) over temperature range of -10°C to +50°C Safe Area Pressure Indicator Hazardous Area Pressure Indicator Integral calibration record with calibration due count-down display Rugged, handheld design with backlit high-contrast display Leak test, tare, maximum/minimum and filter Hazardous Area (Intrinsically safe) version available Optional remote plug and play pressure and Resistance Temperature Detector (RTD) sensors

DPI 705E Improves Test Efficiency • Power on and use. No warm up time required. • 19 pressure measurement units (See below) • 1, 3 or 5 minute leak test • Impact resistant, sealed to IP54 • Large digit high-contrast LCD with backlight • Optional carrying case with belt loop • Optional magnetic/loop hanging strap • Long battery life • Integral desk stand and hanger Special Features Pressure Units mbar, bar, Pa, hPa, Pa, MPa, psi , lb/ft2, kgf/cm2, kgf/m2, mmHg(0°C), mHg(0°C), inHg 0, mmH2O, cmH2O, mH2O, inH2O (4°C, 20°C), ftH2O (4°C, 20°C) Calibration Certificates • Supplied as standard with...

Pressure Ranges Internal and remote sensors are fitted with pressure connectors as detailed below: • 25 mbar - 200 bar (10 inH2O - 3000 psi / 2.5 kPa - 20 MPa): Gl/8 BSP female • Differential reference port: Legris 4 mm tubing adaptor • >350 bar (5000 psi / 35 MPa): Autoclave 9/l6 x 18 UNF Male DPI 705E Internal Pressure Sensors The DPI705E includes an internal Absolute, Gauge or Differential sensor. PM 700E External Remote Pressure Sensors Any number of remote sensors can be used with a single DPI705E as all sensors hold their own calibration data and are supplied with a 2.9m (9.5 feet)...

Notes: • RTD NLH&R includes 24 hour stability. • RTD Total Uncertainty includes 1 year drift.

The DPI 705E and DPI 705E-IS are supplied with a user guide and calibration certificate as standard. Safe Area pressure indicator Hazardous Area pressure indicator Accuracy (Now offering two levels of accuracy - see page 3 for availability by pressure range) 1 Standard Pressure Range and Reference type; (Mandatory to select only one e.g. 008A for each configuration) Gauge (g) Absolute (a) Differential (l) Pressure fitting G1/8 BSP Female G1/4 BSP Female Adaptor 1/8 NPT Female Adaptor 1/4 NPT Female Adaptor Quick-Fit Adaptor 9/16 x 18 UNF Male For ranges less than 350 bar For ranges less...

The PM 700E and PM 700E-IS are supplied with a user guide and calibration certificate as standard. Model Type PM700E Safe Area External remote pressure sensor PM700EIS Hazardous Area External remote pressure sensor Accuracy (Now offering two levels of accuracy - see page 3 for availability by pressure range) 1 Standard Pressure Range and Reference type; (Mandatory to select only one e.g. 008A for each configuration) Gauge (g) Absolute (a) Differential (l) 25 mbar / 10 inH2O / 2.5 kPa 008G Pressure fitting P1 G1/8 BSP Female P2 G1/4 BSP Female Adaptor For ranges less than 350 bar For ranges...

Options OP1 - Negative Calibration Available for Gauge ranges lower than 35 bar. If this option is chosen, then the calibration certificate will include values down to -1 bar g. UKAS Calibration We also offer UKAS accredited calibrations, please advise at the time of order placement if required. Accessories Please state any accessories required as separate items when placing order. The DPI 705E Safe and Hazardous area versions are compatible with the following accessories unless otherwise specified.

Related Products Process Calibrators Druck offer a comprehensive range of portable pressure, temperature and electrical field calibrators. To help you select the right process calibration tools we have categorised our products into three ranges. Druck's Essential range provides rugged, accurate and easy-to-use test and calibration tools. Druck's Expert range introduces higher accuracy and increased functionality. Druck's Elite range provides a modular system offering state-of-the-art multifunction communication and calibration. Fully portable, easy to use, an ideal tool for low pressure...