Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Drim Robotics
  3. Respiro

Respiro

Respiro
1 / 2 PagesView full catalog

Respiro

Product catalog summary
Key Features
  • Fast Installation and Programming: The system is designed for quick setup and ease of use.
  • Gripping Areas: Equipped with 2 valves and 2 zones for efficient operation.
  • Goals: The system aims to operate without external air flow or brackets, maintaining a low weight while supporting a high payload of over 10 kg.
Digital Interfaces
  • URCap Compatibility: Compatible with PolyScope version 3.3 or higher.
Strength Points
  • Plug & Produce: Easy integration into existing systems.
  • Integrated Tool Changer: Allows for seamless tool changes.
  • Customization: Users can customize their own gripper setups.
Adjustable Components
  • Vacuum Cups: Adjustable from a minimum of 1 to a maximum of 20.
  • Valves: Adjustable from a minimum of 1 to a maximum of 2.
Pneumatic Performance
  • Flow Rate: Free flow of 4 l/m with a maximum pressure of 100 mbar and a maximum vacuum of -640 mbar.
Motor Specifications
  • Type: Iron core with ball bearings.
  • Max Current: 290 mA.
Operating Temperature
  • Range: 10 to 50 degrees Celsius (50 to 122 degrees Fahrenheit).
Payload
  • Capacity: Minimum 0 kg, maximum 10 kg (0 to 22 lbs).
Feature Dimensions
  • Dimensions: 160x125xh73 mm (h112 with tool changer).
  • Weight: 1.14 kg.
Interfaces
  • Electrical: 8-pole M8 to the robot, 5-pole M12 to the sensor.
  • Pneumatic: Ø6 or M5.
  • Mechanical: ISO 9409-1 standard.
Tool Changer
  • Dimensions: Diameter 69 x h39 mm.
  • Weight: 0.26 kg.
Contact Information
  • Company: Drim Robotics Sp. z o.o.
  • Location: 43-502 Czechowice-Dziedzice, Poland.
  • Email: [email protected]
  • Website: www.drimrobotics.eu
  • Phone: +48 531 897 079
See more

Catalog excerpts

Respiro-1

RESPIRO AIRLESS VACUUM SYSTEM KEY FEATURES Fast: Istallation Programming Gripping areas: 2 valves 2 zones Goals: No external air flow No external bracket Low weight High Payload (>10kg) URCap (PolyScope≥ 3.3) STRENGHT POINTS Plug&Produce Integrated Tool Changer Free to customize your own gripper Drim Robotics Sp. z o.o. 43-502 Czechowice-Dziedzice, siedziba: uI. Szkolna 39, magazyn: ul. Ligocka 50, Poland [email protected] www.drimrobotics.eu Phone +48 531 897 079 control integrator DIGITAL INTERFACES

 Open the catalog to page 1
Respiro-2

PNEUMATIC PERFORMANCE Operating voltage PRESSURE SIDE Flow at: 100 mbar[l/min] max Pressure [mbar] -100 mbar[l/min] max Vacuum [mbar] VACUUM SIDE Flow at: MOTOR Motor type Max Current [mA] Free Flow Iron core with ball hearings GRIPPERS VacuumCups Valves Inputs FEATURE Mechanical Interface Electrical Interfaces Pneumatic Interface Dust Filters Dimensions Weight Iso 94091 8pole M8-to the robot 5pole M12 to the sensor 2 Free Drive Ø6or M5 160x125xh73mm(h112 with tool changer) 1,14kg TOOL CHANGER Dimensions Weight OPERATING TEMPERATURE Min Celsius Min Fahrenheit

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.