The diamond band saws BS270 S/X/XY are small production machines The diamond band saw BS270 has a fixed saw unit Passage: (HxW) 180 x 255 mm, cutting length (x-Axis) 400 mm. In a standard version the diamond band saw BS 270 is operated manually, but it can also be fitted out as an NCcontrolled 2-axis machine. The sawing force can alternatively be used to control the feed rate, which is defined by the speed of the running workpiece. During cutting, the feed force as well as the feed rate is displayed on the screen. The machine has an open, fault-resilient design. Both dry cutting and cutting with cooling are possible. We build all of our machines in Germany at our premises. Components are subject to strict quality control regulations. Both dry cutting and cutting with cooling are possible. The diamond band saws BS270 S/X/XY are cutting various substrates Graphite Precise, even cuts Catalyser Torn bridges don’t break out Tiles The glaze does not flake off Cooling: dry Speed: 35 mm/min Cooling: water Speed: 60 mm/min Cooling: dry Speed: 900 mm/min Cooling: water Speed: 100 mm/min Aluminium oxide Clean cut, no breaking out Stainless steel coole No soldered plates tear off Plastinate Cutting surfaces on parallel planes Cooling: dry Speed: 300 mm/min Cooling: water Speed: 70 mm/min Cooling: water Speed: 2 mm/min Cooling: water Speed: 30 mm/min

✓ Cut width of 0.4 to 0.8 mm (depending on saw band used) means minimal waste. V Low processing energy means minimal heating and low tension force is sufficient to clamp the workpiece. This virtually eliminates the risk of chipping when machining fragile or temperature- and the servomotor (X axis). Travel and feed rates are programmable. The tables can be positioned with the help of buttons. Control: Mitsubishi touch-screen PLC control with menu-driven programming. The BS270 X is upgraded to the CNC-controlled 2-axis BS270 XY by fitting it with a servomotor-driven Y table. Key features sensitive...