Talk to us!Tel +49 (0)2689-6045www.dramet.com The diamond band saw BS230 XY is a well appointed laboratory machine The diamond band saw BS230 XY impresses with its compact design The machine is well appointed for laboratories and it has a fixed saw unit. Passage: (HxW) 200 x 200 mm, cutting length (x-Axis) 200 mm. Floor space 690 x 780 mm. Height 1850 mm. To saw and cut different thicknesses the diamond band saw BS230 XY is designed to permit, the adjust moving to be quickly set on a cross table that is operated by an servomotor. The feed force is displayed on the screen, that can also be used to adjust the feed rate. The feed rate describes the speed of the machine, not only to carry out the sawing but also clamping the material with an easy material consumption. For added comfort the machine has a standard cab and measuring unit, that controls feed rate. Both dry cutting and cutting with cooling are possible. Cooling: dry Cooling: water Cooling: dry Cooling: water Speed: 35 mm/min Speed: 60 mm/min Speed: 900 mm/min Speed: 100 mm/min Stainless steel coole No soldered plates tear off Cooling: dry Cooling: water Cooling: water Cooling: water Speed: 300 mm/min Speed: 70 mm/min Speed: 2 mm/min Speed: 30 mm/min

Key features ✓ Cut width of 0.4 to 0.8 mm (depending on saw band used) means minimal waste. ✓ Low processing energy means minimal heating and low tension force is sufficient to clamp the workpiece. This virtually eliminates the risk of chipping when machining fragile or temperature-sensitive parts. ✓ The high band speed means high cutting performance. V The quality of the cut surface is as if ground. ✓ The program-controlled, adjustable Y table with linear guiding allows slices to be accurately cut from the workpiece with repeatable thickness. Functioning The diamond saw band runs over two rollers...