USB TEMPERATURE CONVERTER FOR THERMOCOUPLE APPLICATIONS ◌ Industrial processes ◌ Pharmaceutical processes ◌ Food processes ◌ Environmental chamber ◌ Engineering and R&D ◌ Pre-certification ◌ Scientific research ◌ Oven ◌ Temperature detection racks With the TMC100x, connecting a thermocouple to a computer for data acquisition is made easy, allowing you to start recording temperature data, in real time, in just a few minutes. The TMC100x uses a NIST ITS-90 correction table, digital noise filters and compensate the cold junction temperature making the TMC100x an optimal unit with any thermocouple. Sensors connect using a convenient standard mini 2-pin connector. Only Type-k and Type-j converters are supplied with a connector. INSTALLATION TIME Less than 10 minutes UNIQUE SERIAL NUMBER Each unit is assigned a unique serial number allowing for traceability and certification FREE DAQ SOFTWARE Real-time data visualization and logging DATA INTEGRATION Command-line tools for direct data access and integration OPTIONS ◌ Virtual COM Port (VCP) communication protocol ◌ 3-point user calibration mechanism ALSO AVAILABLE Traceability certificates SPECIFICATIONS Parameter TMC100k Thermocouple type Thermocouple operating range[1] Typical accuracy[2] Maximum accuracy TMC100J Thermocouple type Thermocouple operating range[1] Typical accuracy[2] Maximum accuracy TMC100T Thermocouple type Thermocouple operating range[1] Typical accuracy[2] Maximum accuracy TMC100N Thermocouple type Thermocouple operating range[1] Typical accuracy[2] Maximum accuracy TMC100E Thermocouple type Thermocouple operating range[1] Typical accuracy[2] Maximum accuracy Dracal Technologies Inc. All Rights Reserved SPECIFICATIONS Value E -100 to – 1000 Junction at 25°C ±0.5 Junction from 25 to 50°C ±1 Parameter ADC resolution Temperature resolution Samples rate Cold junction compensation Buit-in correction Buit-in noise filter Long-term stability Connector compatibility Condition Hot- and Cold-junction – Up to 3 SPS – NIST ITS-90 – – mini 2 and mini 3-pin Power supply Voltage Current Consumption Mechanical Dimensions Powered through a USB port At 5V See drawing below – – Colour Weight Housing Temperature operating – range [3] Humidity operating range Non-condensing Material – IP rating[3] – System galvanic isolation – Miscellaneous [1] [2] [3] Actual temperature range is probe dependant. Minimum precision over the complete thermocouple operating range. If water condensation is possible, it is recommended to install the probe pointing down to reduce the risk of water build-up in the sensor. If water splashing is possible, protect the sensor and cable converte

PRODUCT DIMENSIONS Dracal Technologies inc. www.dracal.com AVAILABLE CHANNEL(S) As displayed in our logging software CHANNEL ID* Type-x Thermocouple Temperature Thermocouple cold junction temperature Temperature Real Real * Channel Id as it appears in QTenki. Virtual channel Id differ in QTenki and usbtenkiget. CAUTION: Keep in mind that electromagnetic interferences (EMI) may adversely reduce the precision of the sensor. Avoid using this unit close to EMI sources such as motor, transformers, high voltage and fluorescent light. NOTE: This product is not waterproof and must be protected if contact...