Test leaks If desired, we can manufacture special shapes or test dummies with built-in glass capillaries according to customer specifications. We would be happy to prepare an offer for you. Test leaks are used to simulate leakages when setting up or monitoring leak test devices. They are integrated into the test loop instead of an inspection part or simultaneously with a leakproof inspection part. Using a glass capillary especially designed for the desired leak rate, a fixed flow resistance is given. The glass capillary is surrounded by a stainless steel housing and protected against pollution by filters. Our test leaks stand out because of their easy handling and long lifetime. external thread quick fitting coupling external thread G 1/8“ with O-ring Stäubli RBE 03 both sides G 1/8“ available from -999 to 40000 mbar, higher pressures on request available from 0.01 to 1500 ccm/min, other leak rates on request Test media suitable for gaseous and neutral media NBR (standard); Viton (optional) 80µm (standard); 5µm (optional, suitable only for leak rates <0.1 ccm/min) stainless steel incl. test report according to DIN EN 10204; DAKKS Certificate (optional) high quality aluminium-case for a max. of 6 test leaks, consumable sets Quote this number when ordering! Leak test Flow test Function test Dr. Wiesner Steuerungstechnik GmbH, Weststraße 4, D-73630 Remshalden Tel. +49-(0)7151-9736-0, Fax +49-(0)7151-9736-36, [email protected], www