HAND PUMPS
8Pages

HAND PUMPS Hand pump JP-02 for acids, light alkalies and water based chemicals (Stainless steel SS 304 must be resistant). Hand pump JP-03 for oils, diesel, alcohol up to max. 50%, antifreeze liquid (diluted), water, etc. Pump material: Polypropylene Shaft: JP-02 Stainless steel SS 304, JP-03 Tool steel Seals: JP-02 FKM, JP-03 NBR Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on lever position Pump tube length: 340–900 mm Pump tube diameter: max. 40 mm Thread adapter: G 2" and G 1½" JP-02 Hand pump JP-04 for different media. Pump material: Polypropylene Shaft: Polypropylene Seals:...

HAND PUMPS Hand pump JP-05 Suitable for flammable liquids such as solvents (including acetone!) and low viscous food. Pump material: Stainless steel 316Ti Seals: PTFE Flow rate: 0,3–0,6 l/stroke* Pump tube length: 700, 1.000 and 1.132 mm Pump tube diameter: 32 mm JP-05 Necessary accessories: Discharge arc of Stainless steel, with PTFE seal and wing nut made of brass, nickel plated. Ø 11 mm Hose connection made of Stainless steel, with PTFE seal and wing nut made of brass, nickel plated. Hose connection ¾" Drum adapter with locking device. R 2" Brass, nickel plated Anti static set absolutely...

HAND PUMPS Plastic hand pump JP-06 Suitable for water, lightly aggressive acids and alkalies. Pump material: Polyethylene and PVC Flow rate: 0,08 l/stroke, resp. 18,5 l/min at an independent transferring* Pump tube length: 850 mm Pump tube diameter: 25 mm Thread adapter: G 2" The hand pump is designed as a siphon pump and will be supplied with 1.300 mm long discharge hose. After suction pipe and discharge hose have been filled manually the pump works independently. JP-06 Hand pump JP-07 Manual filling and transfer pump Pump body made of Polypropylene, internal parts also made of Stainless...

HAND PUMPS Hand pump JP-08 Hand rotary pump for highly aggressive chemicals. The pump is suitable for thin fluid, very aggressive media such as acids. Pump material: PVDF Seals: PTFE Flow rate: 0,3 l/rotation* Pump tube length: 3 x 35 cm Pump complete with discharge arc and drum adapter G 2" (adapters see page 8). Regular lubrication with PTFE spray is required. JP-08 Hand pump JP-09 Suitable for almost all thin fluid and lightly aggressive media such as acids, light alkalies and cleaning media. Better resistance compared to JP-02 due to a PP shaft. Material: Polypropylene Telescopic...

HAND PUMPS Hand pump JP-11 Hand crank rotary pump The pump is suitable for thin fluid, non-flammable liquids such as diesel, gear oil, heating oil, hydraulic oil, machine oil, mineral oil, motor oil, etc. up to 1.000 mPas. The pump is not suitable for water. Pump complete with 1,35 m discharge hose 1.350 mm, drum adapter G 2" and strainer (Technical data as JP-12). JP-11 Hand pump JP-12 Hand crank rotary pump The pump is suitable for thin fluid, non-flammable liquids such as diesel, gear oil, heating oil, hydraulic oil, machine oil, mineral oil, motor oil, etc. up to 1.000 mPas. The pump is...

HAND PUMPS Hand pump JP-13 Compact hand crank rotary pump The pump is suitable for diesel, heating oil, oils (up to SAE 90) and all other self lubricating, non aggressive and non flammable media. The pump is not suitable for water. Pump material: High impact die cast casing made of zinc, plastics Seals: NBR Flow rate: 0,3 l/stroke* | max. 18 l/min Pump tube diameter: max. 40 mm Strainer diameter: max. 30 mm Telescopic suction tube: adjustable from 355–955 mm. Suitable for smaller containers and 200 liter drums. Pump with discharge arc, drum adapter G 2" and strainer. JP-13 Hand pump JP-15...

HAND PUMPS Hand pump JP-16 Fire brigade hand pump ATEX compliant, single-acting reciprocating pump that can be used for following media of hazard classes A I-III: * ll specified values are real measured values. A The flow rate of the pump refers to water at 18 °C and free outlet. Diesel, heating oil light/heavy, fuel, petroleum, anti freezing liquid for cooler (undiluted), thin fluid mineral oils and rapeseed methylester. Execution for fire brigades with flexible suction hose instead of a rigid tube. Suction hose DN 19 x 4; 1,5 m Discharge hose DN 19 x 4; 1,5 m Flow rate: app. 0,25...