• Cost-effective operation through a fully automatic cycle, segment feeding via belt magazine, and segment positioning by a gripper system. The machine uses an electric drive for blade rotation with a fork-type light barrier.
• Improved saw blade quality is achieved by precise temperature measurement and control using an optical pyrometer.
• Optimal brazing results are ensured by adjustable segment pressing.
• Enhanced brazing joints for sandwich blades through pre-heating of the blade without segments.
• Improved brazing cycle with up to three heating ramps.
• Shorter cycle and change-over times due to contact copper cooling cheeks for cooling the saw blank.
• High efficiency is provided by a high-frequency generator with 10 kVA output power, including an air conditioner.
• Suitable for saw blades ranging from 200 mm to 2000 mm in diameter (a pit is required for diameters above 1500 mm).

• Cooling units with different specifications (10 kW, 50 Hz or 11 kW, 60 Hz).
• Adapter for gang saws.
• Additional inductor available upon request.

The blank is vertically clamped, and diameter adjustments are made via a spindle to maintain a constant working height. Segments are stacked in a belt-type magazine. The brazing process starts automatically with a segment and silver solder placed on the blank, continuing until the entire blank is brazed.

• Total electric power: 14 kVA, with a supply voltage of 3 x 400 V, 50/60 Hz.
• Cooling water consumption is approximately 25 l/min, with a recommended supply temperature of 15 – 25°C and a pressure of 4 – 6 bar.
• Compressed air consumption is approximately 250 l/min, with a pressure of 4 – 6 bar.
• Suction system connection requires a hose or pipe with an inner diameter of 50 mm and a recommended air flow rate of 600 m³/h.
• Diameter range for saw blades is 200 mm to 2000 mm, with segment dimensions of length 20 – 50.8 mm, depth 1.8 – 12 mm, and height 5 – 25 mm.
• Machine dimensions are approximately 1880 x 1350 x 2200 mm, with a weight of approximately 950 kg.