• Designed for core drills with diameters ranging from 32 to 600 mm.
• Fully automatic regulation of segment side clearance for each segment.
• Optical measurement of core drill length.
• Precise temperature control with a pyrometer.
• Automatic clamping chuck and adjustable segment magazine.
• Powered solder feeding and short cycle/change-over times.
• Intuitive touch screen panel for entering brazing parameters.
• Free-programmable segment pitch and high frequency generator (10 kVA) with adjustable output.
• Includes one inductor for core drill diameter range 120 – 600 mm.

• Cooling units with different specifications (10 kW, 50 Hz or 11 kW, 60 Hz).
• Tube magazine for 6/12 separation.
• Automatic flux-feeding with 1.5 kg flux Umicore H 285.
• Additional inductor available.

The machine positions the cross slide into the brazing position, heats the tube, and measures the position using a tracer. Segments are taken from the magazine, centered, and brazed onto the core drill. This process repeats until the entire core drill is brazed, after which the core drill is removed and replaced with the next tube.

• Total electric power: 14 kVA, Supply voltage: 3 x 400 V, 50/60 Hz.
• Cooling water consumption: approx. 20 l/min, recommended temperature: 15 – 25 °C.
• Compressed air consumption: approx. 500 l/min, pressure: 4 – 6 bar.
• Suction system connection: inner Ø 40 mm, recommended air flow rate: 600 m³/h.
• Core drill tubes diameter range: Ø 32 – 600 mm, usable length: 20 – 670 mm.
• Segment dimensions: length 10 – 24 mm, thickness 2.5 – 10 mm, height 5 – 15 mm.
• Machine dimensions without magazine: approx. 2,180 x 1,400 x 1,800 mm, weight: approx. 850 kg.
• Machine dimensions with magazine: approx. 3,700 x 2,000 x 1,800 mm, weight: approx. 1,230 kg.

Note: Subject to modifications of technical data and design.