Product Information High Performance ® Lubricants Molykote Hydraulic Oils FEATURES • Lower overall maintenance costs • Wider temperature range Longer oil-drain intervals Reduced lubricant consumption Extended equipment lifetime Reduced energy consumption Long life reduces lubricant usage, maintenance costs • • • • • COMPOSITION • Hydrocracked mineral oil (MO) and polyalphaolefin/mineral oil (PAO/MO), based lubricants. DESCRIPTION Molykote® hydraulic oils minimize formation of emulsions in contact with water due to the purity of the base fluid. They will generally perform successfully in hydraulic systems far longer than conventional hydraulic oils. Plants can gain significant savings from reduced oil consumption, reduced disposal cost, labor savings and fewer interruptions to production. These non-toxic oils are derived from hydrocracked or synthetic base stocks and can be used in systems designed for low pour point or high flash point mineral oils. HOW TO USE Follow equipment manufacturer’s recommendations for maintenance procedures and oil specifications. HANDLING PRECAUTIONS Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection. USABLE LIFE AND STORAGE Molykote hydraulic oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for use-by date. PACKAGING To ensure the longest possible life for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of antioxidants in lubricating fluids. Sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information. LISTING AND SPECIFICATIONS Molykote lubricating fluids are kosher approved and conform to USDA listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food. Molykote hydraulic oils are available in 18.9- and 208.2-L (5- and 55-gal) containers. LIMITATIONS These products are neither tested nor represented as suitable for medical or pharmaceutical uses. SHIPPING LIMITATIONS None.

HEALTH AND ENVIRONMENTAL INFORMATION LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe,...