MOLYKOTE® 7325 GreaseLithium-thickened silicone grease with EP/AW additivesFeatures & benefits • Wide service-temperature range • Good AW properties especially in over-running clutches • Resistance to oxidation and moisture • No intentional polytetrafluoroethylene (PTFE) or per- and polyfluoroalkyl substances (PFAS) • Lithium soap • EP/AW additives Over-running clutches in automotive starter motors. MOLYKOTE® 7325 Grease is designed for lubrication of overrunning clutches in starter motors. MOLYKOTE® 7325 Grease offers long service life at a wide service-temperature range. Clean points of lubrication. As is usual with lubricating grease, apply or fill by means of brush, spatula, or automatic filling device. PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. When stored at or below 40°C (104°F) in the original unopened containers, this product has a usable life of 60 months from the date of production. Specification writers: These values are not intended for use in preparing specifications. Please contact your local MOLYKOTE® sales representative prior to writing specifications on this product. (1)DIN: Deutsche Industrie Norm. CTM: Corporate Test Method.; copies of CTMs are available on request. This product is available in different standard container sizes as shown on molykote.com. Detailed container size information should be obtained from your nearest MOLYKOTE® sales office or MOLYKOTE® distributor.

DuPont™, the DuPont Oval Logo, and all trademarks and service marks denoted with ™, ℠ or ® are owned by affiliates of DuPont de Nemours, Inc. unless otherwise noted. © 2006-2024 DuPont. The information set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls within the normal range of properties. It is intended for use by persons having technical skill, at their own discretion and risk. This data should not be used to establish specification limits nor used alone as the basis of design. Handling precaution information is given with...