MOLYKOTE® 1000 PasteSolid lubricant paste for bolted metal joints; contains no lead or nickel Typical properties Specification writers: These values are not intended for use in preparing specifications. Please contact your local MOLYKOTE® sales representative prior to writing specifications on this product. Four-ball tester Features & benefits • Can be used over a wide range of temperatures (-30°C/-22°F to +650°C/1,202°F) • High load-carrying capacity • Enables nondestructive dismantling, even after long use at high temperatures • Coefficient of friction unchanged in the area of oiled bolts, even after several bolt retightening and loosening processes • Good corrosion protection • No intentional polytetrafluoroethylene (PTFE) or per- and polyfluoroalkyl substances (PFAS) • Solid lubricants • Powdered metal Suitable for bolted joints that are subjected to high temperatures up to 650°C (1,202°F) and to corrosive effects - and that after assembling and the initial operation, have to be retightened or disconnected. In order to ensure constant pre-stressing forces, uniform and steady coefficients of friction of the lubricant are necessary. Used successfully for cylinder head bolts, nozzle head screws of plastic injection molding machines, bolted joints in the chemical industry, and also for the tension rings of centrifuges. MOLYKOTE® 1000 Paste is a lead- and nickel-free anti-seize paste used to reduce wear and optimize friction of threaded fasteners, or other metal-to-metal joints, enabling nondestructive dismantling, even after long exposure to high temperatures. It offers good corrosion protection, under high loads, over a wide temperature range. If possible, clean the thread and the bolt with a wire brush. Spread an adequate amount of the paste on the thread, right up to its root to obtain a good seal. In order not to alter the properties, the paste must not be mixed with grease or oils. DIN 51 350 Wear scar under 400 N mm 0.65 Almen-Wieland machine Frictional force Screw test - j head 0.08 ISO: International Standardization Organization. DIN: Deutsche Industrie Norm. Temperature resistance of solid lubricants. Coefficient of friction in bolted connection, M12, 8.8, on blackened surface. M 12, with starting torque Ma = 62 Nm and heat treatment at 540°C (1,004°F), 21 hr, bolt material: no. 1.7709. To enable this product to be applied more quickly and cleanly to larger areas, it is advisable to use the sp

Handling precautions PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. Usable life and storage When stored at or below 20°C (68°F) in the original unopened containers, MOLYKOTE® 1000 Paste has a usable life of 60 months from the date of production. Specifically for aerosol packaging, this product has a usable life of 24 months from the date of production when stored between 5°C and 35°C in the original unopened container. Because it is an aerosol,...