1. Catalogs
  2. Dow Corning
  3. DOW CORNING® 3362 Insulating Glass Sealant
video corpo

DOW CORNING® 3362 Insulating Glass Sealant

DOW CORNING® 3362 Insulating Glass Sealant
1 / 13 PagesView full catalog

DOW CORNING® 3362 Insulating Glass Sealant

Product catalog summary
Introduction
The document addresses the growing demand for energy-efficient insulating glass units (IGUs) in modern architecture, focusing on the use of gas-filled IGUs and silicone as a secondary sealant. It highlights the benefits of silicone sealants over organic-based ones, particularly in terms of UV resistance and adhesion durability.

Specifications and Standards
Dow Corning 3362 is a silicone sealant for IGUs that complies with EN 1279-3 and DIN 1286-2 standards. Over 20 gas-filled and silicone-sealed IGU systems have been successfully launched using Dow Corning sealants. Additionally, Dow Corning products meet standards such as EN1279 part 4 and CEKAL, with initial qualification and factory production control being the responsibility of IG manufacturers.

Design and Manufacturing Considerations
Due to silicone's gas permeability, specific design and manufacturing measures are necessary to ensure gas tightness. These include minimizing the area for gas transmission, using bent spacer-frame corners, and employing semi-automatic PIB application equipment. Proper cleaning and application of primary and secondary sealants are emphasized.

Product Recommendations
Dow Corning recommends silicone as a secondary sealant for IGUs, ensuring suitability based on physical and adhesion properties. The 3362 HD base grade is introduced, offering a higher Young’s modulus to enhance gas tightness by minimizing seal and spacer movement under pressure.

Technical Support and Quality Control
Dow Corning provides technical support for planning and evaluating IGU systems, focusing on gas loss rate considerations. The responsibility for initial classification and quality control of gas-filled IGUs lies with the IGU manufacturer, according to relevant standards.

Testing and Performance
The document includes a table summarizing various IG systems that have successfully passed industry standards for gas retention, with gas loss rates below 1%. These systems utilize Dow Corning products and have been tested by various institutes across different countries.

Conclusion
The document concludes by emphasizing the importance of collaboration among all parties involved to ensure the desired properties of the IGU system. It highlights the introduction of Dow Corning 3362 HD, which offers improved gas tightness and durability. Users are advised to conduct their own tests to ensure product suitability for specific applications, and suggestions should not be interpreted as inducements to infringe patents.
See more

Catalog excerpts

DOW CORNING® 3362 Insulating Glass Sealant-1

Construction Solutions DOW CORNING® 3362 Insulating Glass Sealant and Argon Filled Insulation Glass

 Open the catalog to page 1
DOW CORNING® 3362 Insulating Glass Sealant-2

Der weltweite Trend zur Energieeinsparung und die moderne Architektur schrauben die Anforderungen an Dauerhaftigkeit und Wärmedämmung von Isolierglas-Einheiten nach oben. Dadurch steigt auch die Nachfrage an gasgefüllten Isoliergläsern und Warm-Edge-Technologienmit Silikon als Sekundär-Dichtstoff. The global trend on Energy saving combined with today’s geringen Gasdurchlässigkeit besteht Während eines der Hauptmerkmale von Dichtstoffen auf organischer Basis in ihrer modern architecture de(was eine driven stringent requirements for Insulating geringere Haftbeständigkeit am Glas. Dies sign are...

 Open the catalog to page 2
DOW CORNING® 3362 Insulating Glass Sealant-3

na negnuredrofnA eid nebuarhcs rutketihcrA enredom eid dnu gnurapsnieeigrenE ruz dnerT etiewtlew reD na egarfhcaN eid hcua tgiets hcrudaD .nebo hcan netiehniE-salgreilosI nov gnummädemräW dnu tiekgitfahreuaD .ffotsthciD-rädnukeS sla nokiliS tim neigolonhceT-egdE-mraW dnu nresälgreilosI netllüfegsag thetseb tiekgis älhcrud aG egnireg rerhi i sisa re csinagro fua neff tsth D nov elamkre gas filling, Workmanshipsplayssan nimportantnroleBin hdeterminingothecisuccess of mtpuaH red senie dnerhäW seiD .salG ma tiekgidnätsebtfaH eregnireg enie effotsthciD eseid nebah ,)tbualre znarelotsgnugitreF ereßörg...

 Open the catalog to page 3
DOW CORNING® 3362 Insulating Glass Sealant-4

Interpane / Germany Okalux / Germany Uniglas – Marte / Switzerland MGT / Austria ... Bayer - BGT / Germany BGT / Germany Polypane / Netherlands Lisec / Austria Flachglas Markenkreis / Germany Glaverbel / Belgium Dow Corning® 3362 Stainless Steel Dow Corning® 993 Stainless Steel Dow Corning® 3362 Stainless Steel Dow Corning® 3362 Stainless Steel ... Dow Corning® 3362 Alu Dow Corning® 3362 Stainless Steel + Alu Dow Corning® 3362HD Galvanized Steel Dow Corning® 3362 EdgeTech TriSeal Dow Corning® 3362HD Stainless Steel Dow Corning® 3362HD Stainless Steel + TGI-W ... DIN 1286 P1/P2 DIN 1286 P1/P2...

 Open the catalog to page 4
DOW CORNING® 3362 Insulating Glass Sealant-5

Fachgiuppe Werkstoff- und Bauteilpriifung _ 39104 Magdeburg, Grofie Steinernetischstr. 4 //JSKk. k ^AfH^FM-AMHAIT Gasgefulltes Mehrscheiben-lsolierglas Abstandhalter: Edelstahl Chromatech-Plus /14 mm Versiegelungsaufbau: Polyisobutylen Terostat 969 und Die Prufungen erfolgten im Auftrag der obengenannten Firma durch Langzeitprufverfahren und Anforderungen bezuglich Gasverlustrate 1. Grundlage der Prufung sind folgende Normen und Richtlinien prEN 1279-1 Allgemeines, Ma&toleranzen und Vorschriften fur die Systembeschreibung prEN 1279-2 Langzeitprufverfahren und Anforderungen bezuglich prEN 1279-3...

 Open the catalog to page 5
DOW CORNING® 3362 Insulating Glass Sealant-6

Landesmaterialprufamt Prufbericht Seite 2 von 4 Seiten Scheibenaufbau: 4 mm Float /14 mm SZR / 4mm Float Teroson GmbH Grace GmbH Werkstoff/Typ: Edelstahl Chromatech-Plus Diffusionsoffnungen: zweireihig perforiert umlaufend maschinell gebogen mit einem Stahl- Langsverbinder (Serie EK L 1279) der Eduard Kronenberg GmbH, Solingen, verbunden und mit Butyl abgedichtet Nach zweiwochiger Lagerung der 8 Proben im Anlieferungszustand unter Normallabor- bedingungen erfolgte zunachst die Messung der Taupunkttemperatur (DPi) aller Proben im Anlieferungszustand. Entsprechend prEN 1279-2 wurde die Benummerung...

 Open the catalog to page 6
DOW CORNING® 3362 Insulating Glass Sealant-7

Landesmaterialprufamt Prufbericht Seite 3 von 4 Seiten 4.1 Tabelle 1: Dichtstoffiiberdeckung, Taupunkt, Beladung des Trocknungsmittels 4.2 Tabelle 2: Abmessungen, Gasfullung, Shore- Harte 5.1 Feuchtigkeitsaufnahmefaktor nach prEN 1279-2 Durchschnittliche Beladung des Trocknungsmittels Durchschnittliche Feuchtigkeitsaufnahmekapazitat: Tcav= 20 Vol. % * * Tc av nach Angaben des Trocknungsmittelherstellers

 Open the catalog to page 7
DOW CORNING® 3362 Insulating Glass Sealant-8

Landesmaterialprufamt Priifbericht Seite 4 von 4 Seiten Durchschnittlicher Wert I av = 6,73 % Grenzwert I aVi(im < 20 % Diese Prufung hat nur orientierenden Charakter, da im Vergleich zu DIN EN 1279-2 der Klimatest nur uber die Halfte der Zeit durchgefuhrt wurde. 5.2 Prufung nach prEN 1279-3, Abschnitt 5.4 Das untersuchte Mehrscheiben-lsolierglas erfullt die Anforderungen nach prEN 1279-3. Dip&ng. Gall Dipl.-lng. Triebenecker

 Open the catalog to page 8
DOW CORNING® 3362 Insulating Glass Sealant-9

iiiuv IfHertfnlvcrsifaire uos Silicates, Sol? et f/kif^rlauy: Laboratoire de Recherches et d'Essais Association sons but lucrotif Avenue Gouverneur Comez, 4 Laboratoire agree : Voir circulate 514-B/33 du 09/02/87 du RAPPORT D'ESSAI N° 2006B VIDO 2601-1c V/Ref.: Commande n° 45583670 du 25 octobre 2005 REFERENCE DE LA DEMANDE : Commande n° 45583670 du 25 octobre 2005 DESCRIPTION DES ECHANTILLONS : Vitrages isolants avec gaz Argon NOMBRE ET IDENTIFICATION DES ECHANTILLONS : 9 echantillons (marquage serie 72) ECHANTILLONS RECUS LE : 27 octobre 2005 DATE DE DEBUT DES ESSAIS : 3 novembre 2005 OBSERVATIONS...

 Open the catalog to page 9
DOW CORNING® 3362 Insulating Glass Sealant-10

^ 9 Insfitut [nteruniversitaire des Silicates, Sols et Mafertaux lOISflTte Laboratoire de Recherches et d'Essais Avenue Gouvemeur Comez, 4 Laboratoire agrie : Voir circulate 514-B/33 du 09/02/87 du Association sans but lucrolif RAPPORT D'ESSAI N° 2006B VIDO 2601-2 REFERENCE DE LA DEMANDE : Commande n° 45583670 du 25 octobre 2005 DESCRIPTION DES ECHANTJLLONS : Vitrages isolants avec gaz Argon NOMBRE ET IDENTIFICATION DES ECHANTILLONS : 9 echantillons (marquage serie 97) OBJETDE LA DEMANDE: INITIAL TYPE TEST ECHANTILLONS RECUS LE : 21 novembre 2005 DATE DE DEBUT DES ESSAIS : 24 novembre 2005 OBSERVATIONS...

 Open the catalog to page 10
DOW CORNING® 3362 Insulating Glass Sealant-11

Institut tnteruniversttaire des Silicates, Sols et Ntateriaux Laboratoire de Recherches et d'Essais Association sans but lutratif Avenue Gouverneur Cornez, 4 Laboratoire agree : Voir circulate 514-B/33 du 09/02/87 du RAPPORT D'ESSAI N° 2006B VIDO 2601-3 REFERENCE DE LA DEMANDE : Commande nD 45583670 du 25 octobre 2005 DESCRIPTION DES ECHANTILLONS : Vitrages isolants avec gaz Argon NOMBRE ET IDENTIFICATION DES ECHANTILLONS : 10 echantillons (marquage serie 99) OBJET DE LA DEMANDE : INITIAL TYPE TEST ECHANTILLONS RECUS LE : 27 octobre 2005 DATE DE DEBUT DES ESSAIS : 3 novembre 2005 OBSERVATIONS...

 Open the catalog to page 11
DOW CORNING® 3362 Insulating Glass Sealant-12

interuniversifuirc des Silicotos, L-ols- ci lumerio JY Loboratoire de Recherches et d'Essais Association sans but lucrotif Avenue Gouverneur Cornez, 4 Laboratoire agrte : Voir ciiculaire 514-B/33 du 09/02/87 du RAPPORT D'ESSAI N° 2006B VIDO 2601-4c REFERENCE DE LA DEMANDE : Commande n° 45583670 du 25 octobre 2005 DESCRIPTION DES ECHANTILLONS : Vitrages isolants avec gaz Argon NOMBRE ET IDENTIFICATION DES ECHANTILLONS : 10 echantillons (marquage serie 100) ECHANTILLONS RECUS LE : 27 octobre 2005 DATE DE DEBUT DES ESSAIS : 3 novembre 2005 OBSERVATIONS SPECIALES : * essais accredited BELTEST OBJET...

 Open the catalog to page 12

Archived catalogs

  1. MOLYKOTE® 44

    2  Pages

  2. Automative

    4  Pages

  3. 2 part RTV

    6  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.