1. Catalogs
  2. Dow Corning
  3. Antifoam Solutions for Metalworking Fluids
video corpo

Antifoam Solutions for Metalworking Fluids

Antifoam Solutions for  Metalworking Fluids

Antifoam Solutions for Metalworking Fluids

Product catalog summary
Introduction
Dow Corning® AFE 1267 Antifoam Emulsion is a high-solid-content product designed for the metalworking fluid (MWF) industry. It is used for defoaming various metalworking fluid formulations, including emulsions and microemulsions, across different solubilities and chemical solutions.
Key Features
  • High active levels and odorless composition.
  • Clear, transparent fluid without compromising defoaming performance.
  • High dispersibility and compatibility with various MWF formulations.
  • Effective performance across a wide temperature range, including low temperatures.
  • Cost-effective due to low dosage rates achieving similar performance.
Performance
Based on pump and shake tests, Dow Corning AFE 1267 Antifoam Emulsion shows superior knockdown and persistency performance compared to competitors. It also provides better anti-filtration performance and maintains transparency while delivering equivalent defoaming performance.
Defoaming Test Results
In a shake test, Dow Corning AFE 1267 demonstrated faster defoaming times compared to competitors, maintaining a consistent foam height of 110 mL and reducing defoaming time significantly.
Handling Precautions
Product safety information is not included in the document. Users should consult the product and safety data sheets and container labels for safe use and hazard information, available on the Dow Corning website or through customer service.
Warranty and Liability
Dow Corning provides a limited warranty that products will meet sales specifications at the time of shipment. Remedies are limited to refund or replacement. Dow Corning disclaims any other warranties and liability for incidental or consequential damages.
Additional Information
For more information or to request samples, visit the Dow Corning website.
See more

Catalog excerpts

Antifoam Solutions for  Metalworking Fluids-1

Chemical and Industrial Manufacturing Solutions Dow Corning® AFE 1267 Antifoam Emulsion is a high-solid-content product specially developed for the metalworking fluid (MWF) industry. This formulation aid can be used for defoaming a range of metalworking fluid formulations, including various emulsions and microemulsions, in various solubilities and chemical solutions. Dow Corning AFE 1267 Antifoam Emulsion features: • High active levels • Odorless composition • The benefit of a clear, transparent fluid without compromising defoaming performance • High dispersibility and compatibility with various metalworking fluid formulations • Excellent performance at a wide range of temperatures, including low temperatures • Lower cost in use - can reach similar performance at low dosage rates This emulsion’s good defoaming performance and its workability over a wide temperature range enable MWF formulators more options in raw material selection and assist formulators in developing higher-efficiency materials. Performance Based on the pump test and shake test, Dow Corning AFE 1267 Antifoam Emulsion demonstrates better knockdown and persistency performance (see Table 1) than a competitive product. Dow Corning AFE 1267 Antifoam Emulsion also provides better antifiltration performance, as shown in Figure 1 on page 2. Additionally, Dow Corning AFE 1267 Antifoam Emulsion demonstrates transparency while providing equivalent defoaming performance, as shown in Figure 2 on page 2. Table 1. Defoaming test after shake test in metalworking fluid (chemical solution)1 *Defoaming test conditions: Antifoam added at 0.1% to the metalworking fluid; metalworking fluid diluted 20 times.

 Open the catalog to page 1
Antifoam Solutions for  Metalworking Fluids-2

Time, minutes After filtration: Dow Corning® AFE 1267 Antifoam Emulsion After filtration: Competitor Dow Corning® AFE 1267 Antifoam Emulsion For More Information Our innovative, silicon-based enabling technologies can help you infuse your products with high-value performance attributes that can give you a competitive advantage in the marketplace. As a leader and innovator with a long history of success in the industry, our defoaming technology platforms are well-aligned to the needs of the increasingly competitive global market. To request samples of Dow Corning AFE 1267 Antifoam Emulsion or...

 Open the catalog to page 2

Archived catalogs

  1. MOLYKOTE® 44

    2  Pages

  2. Automative

    4  Pages

  3. 2 part RTV

    6  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.