NARROW WEB TENSION TRANSDUCERS Model NW
4Pages

DOVER FLEXO ELECTRONICS, INC. ISO 9001 CERTIFIED NARROW WEB TENSION TRANSDUCERS

■ Wide operating tension range. ■ Two mounting styles: four bolt flange or single bolt. ■ Nine roll widths up to 20 inches. Special widths available. ■ Used with any standard Dover Tension Controller or Indicator, or with built-in Indicator Display option (Size 2 only). ■ Requires little machinery space. NW NARROW WEB Tension Transducer The NW Transducer is a specialized bearing-mounted cantilevered idler roll with integrated dual tension sensors for measuring tension in a moving narrow web of paper, film, foil or other material. Constructed of stainless steel and aluminum for excellent...

ELECTRICAL Excitation: 5 Vdc (10 Vdc with XR option) Output: 500mVdc, nominal (1 Vdc with XR option) Gage Resistance: Half bridge at each end of idler roll. 100 Ohms (± 20 ohms), nominal, each gage. Non-Repeatability: ± 1/4% FS, typical Combined Non-Linearity and Hysteresis: ± 1/2% FS Temperature Range: -10°F to 200°F (-23°C to 93°C), IND Option: 40° to 104°F (4°C to 40°C) Temperature Coefficient: 0.02% per ° F, typical (0.036% per °C), Mating Electrical Connector: ITT Cannon KPT06F10-6S Electrical Connector Position: Connector position is shown by looking at end of roll. Standard is 6...

DIMENSIONS FOR AMPLIFIER MODULE FOR IND OPTION Ti26 (shown with DIN Rail Clip option). Power input is 24Vdc THE TENSION CONTROL SPECIALISTS DOVER FLEXO ELECTRONICS, INC. 217 PICKERING ROAD, ROCHESTER, NH 03867 USA • 603-332-6150 • FAX 603-332-3758 E-Mail: info@dfe.com • Internet: www.dfe.com • ISO 9001 Certified ©2014 DOVER FLEXO ELECTRONICS, INC. ALL RIGHTS RESERVED