1. Catalogs
  2. Dosier- und Prüftechnik GmbH
  3. WHEELS FOR BARREL PUMP FP050

WHEELS FOR BARREL PUMP FP050

WHEELS FOR BARREL PUMP FP050

WHEELS FOR BARREL PUMP FP050

Product catalog summary
General Accessories Overview
The document provides detailed specifications and descriptions of various general accessories for high-pressure barrel pumps and related equipment. These accessories are designed to enhance the functionality and efficiency of the pumping systems.

Grease Distributor 5-Fold
This accessory includes a connection nipple and is available in three variants: G 1/4", G 1/8", and G 1/2". It features a 5-fold distribution system with a double nipple for optimal material feed distribution. Unused outlets can be sealed pressure-tight with supplied screw fittings.

Superstructure for Barrel Pump Operating Unit
Available in single and tandem configurations, this aluminum frame is designed for mounting barrel pump accessories and the operating unit.

Vent Hose for Barrel Pumps
Designed for mounting on the vent cock of the barrel pump suction pipe, it has a length of 1 meter and can withstand pressures up to 800 bar at 20°C and 450 bar at 60°C.

Direct Switchover/Stop Automatic
This automatic system is used for tandem barrel pumps, allowing automatic switchover to a second pump when the first barrel is emptied, and automatic stop when both barrels are empty.

Dry Run Safety
Available in single and tandem versions, this valve automatically shuts off the compressed air supply when an increased conveying speed is detected, preventing unwanted container emptying.

Check Valve Package
Available in G 3/8" and G 1/2" variants, this package prevents backflow into inactive pumps by automatically closing the valve at the pump outlet.

Wheels for Barrel Pump FP050
This set includes two fixed and two swivel castors with a parking brake for mobility.

Rotating Coupling
Available in G 1/4" and G 1/8" variants, this coupling provides a flexible connection between high-pressure hoses and components, preventing torsion and unwanted opening of fittings.

High Pressure Teflon Hose
Available in G 1/8", G 1/4", and G 3/8" variants, this hose is suitable for high-temperature and aggressive media applications, withstanding temperatures from -50°C to +230°C and pressures up to 2 MPa.

High Pressure Hose
Available in G 1/4", G 1/8", G 3/8", and G 1/2" variants, this hose is designed for medium-pressure hydraulic applications, suitable for temperatures from -40°C to +100°C.
See more

Catalog excerpts

WHEELS FOR BARREL PUMP FP050-1

DOSIER -e PROF TECHNIKl GMBH GREASE DISTRIBUTOR 5-FOLD INCL. CONNECTION NIPPLE DP-D-003-000006 // G 1/4" 5-fold grease distributor with double nipple for optimum distribution of the material feed. The outlets that are not required can be closed off in a pressure-tight manner using the screw fittings supplied. G 1/4" = internal & external thread G 1/8" = internal & external thread G 1/2" = internal & external thread Frame made of aluminum profile for receiving and mounting the barrel pump accessories and the barrel pump operating unit. Mounted on the vent cock of the barrel pump suction pipe.

 Open the catalog to page 1
WHEELS FOR BARREL PUMP FP050-2

HIGH PRESSURE BARREL PUMPS ACCESSORIES MATERIAL SUPPLY GENERAL ACCESSORIES DIRECT SWITCHOVER/STOP AUTOMATIC DP-F-003-000016 The automatic changeover for tandem barrel pumps is mounted in the follower plate. After the first barrel has been completely emptied (on contact with the bottom), there is an automatic switchover (automatic changeover) to the second pump mechanism. When both barrels are completely emptied, the pump switches off automatically (automatic stop), thus preventing air from being sucked in. F P200-T DRY RUN SAFETY DP-F-003-000020 // single DP-F-003-000021 // tandem The valve for...

 Open the catalog to page 2
WHEELS FOR BARREL PUMP FP050-3

DOSIER -e PROF TECHNIKl GMBH Flexible connection between high-pressure hose and components. The coupling prevents torsion of the hose or unwanted opening of fittings and can be rotated in any direction. The high pressure teflon hose is used for medium pressure applications with hydraulic fluids at high temperatures as well as for aggressive media for the chemical industry, surface technology and 2-component plants. It is suitable for continuous temperatures from -50 °C to +150 °C and +230 °C at operating pressures up to 2 mpa and is resistant to almost all hydraulic fluids and chemicals. Inner...

 Open the catalog to page 3
WHEELS FOR BARREL PUMP FP050-4

GENERAL ACCESSORIES HIGH PRESSURE HOSE DP-D-002-000001 // G 1/4" The high pressure hose is used for demanding medium-pressure hydraulic applications and for media such as hydraulic fluids, mineral oil or water-glycol based, lubricating oils, air and water. It is suitable for the temperature range from -40 to +100 °C. Inner layer material: nitrile Compression member: Two high-tensile steel mesh Applications

 Open the catalog to page 4

All Dosier- und Prüftechnik GmbH catalogs and technical brochures

  1. PULSE VALVES

    6  Pages

  2. BARREL PUMPS

    6  Pages

  3. DOSING VALVES

    6  Pages

  4. OUTLET VALVES

    6  Pages

  5. OUTLET VALVE

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.